|
|
PDF EL5411T Data sheet ( Hoja de datos )
| Número de pieza | EL5411T | |
| Descripción | 60MHz Rail-to-Rail Input-Output Operational Amplifier | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL5411T (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
®
Data Sheet
October 8, 2009
EL5411T
FN6837.1
60MHz Rail-to-Rail Input-Output
Operational Amplifier
The EL5411T is a high voltage rail-to-rail input-output
amplifier with low power consumption. The EL5411T
contains four amplifiers. Each amplifier exhibits beyond the
rail input capability, rail-to-rail output capability and is unity
gain stable.
The maximum operating voltage range is from 4.5V to 19V. It
can be configured for single or dual supply operation, and
typically consumes only 3mA per amplifier. The EL5411T has
an output short circuit capability of ±300mA and a
continuous output current capability of ±70mA.
The EL5411T features a high slew rate of 100V/µs, and fast
settling time. Also, the device provides common mode input
capability beyond the supply rails, rail-to-rail output
capability, and a bandwidth of 60MHz (-3dB). This enables
the amplifiers to offer maximum dynamic range at any supply
voltage. These features make the EL5411T an ideal amplifier
solution for use in TFT-LCD panels as a VCOM driver or
static gamma buffer, and in high speed filtering and signal
conditioning applications. Other applications include battery
power and portable devices, especially where low power
consumption is important.
The EL5411T is available in a 14 Ld HTSSOP and a space
saving thermally enhanced 16 Ld 4mmx4mm TQFN package.
The device operates over an ambient temperature range of
-40°C to +85°C.
www.ODartadSehereint4Ug.cIonmformation
PART NUMBER
(Note)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
EL5411TIREZ
5411TIRE Z 14 Ld HTSSOP M14.173A
EL5411TIREZ-T7*
5411TIRE Z 14 Ld HTSSOP M14.173A
Tape and Reel
EL5411TIREZ-T13*
5411TIRE Z 14 Ld HTSSOP M14.173A
Tape and Reel
EL5411TILZ
5411TIL Z 16 Ld TQFN L16.4x4F
EL5411TILZ-T7*
5411TIL Z
16 Ld TQFN L16.4x4F
Tape and Reel
EL5411TILZ-T13*
5411TIL Z
16 Ld TQFN L16.4x4F
Tape and Reel
*Please refer to TB347 for details on reel specifications
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• 60MHz (-3dB) Bandwidth
• 4.5V to 19V Maximum Supply Voltage Range
• 100V/µs Slew Rate
• 3mA Supply Current (per Amplifier)
• ±70mA Continuous Output Current
• ±300mA Output Short Circuit Current
• Unity-gain Stable
• Beyond the Rails Input Capability
• Rail-to-rail Output Swing
• Built-in Thermal Protection
• -40°C to +85°C Ambient Temperature Range
• Pb-Free (RoHS Compliant)
Applications
• TFT-LCD Panels
• VCOM Amplifiers
• Static Gamma Buffers
• Drivers for A/D Converters
• Data Acquisition
• Video Processing
• Audio Processing
• Active Filters
• Test Equipment
• Battery-powered Applications
• Portable Equipment
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page  
EL5411T
Electrical Specifications VS+ = +18V, VS- = 0V, RL = 1kΩ to 9V, TA = +25°C, Unless Otherwise Specified.
PARAMETER
DESCRIPTION
CONDITION
MIN TYP
MAX
UNIT
INPUT CHARACTERISTICS
VOS
TCVOS
Input Offset Voltage
Average Offset Voltage Drift (Note 3)
VCM = 9V
14 LD HTSSOP package
16 LD TQFN package
3.5 17 mV
21 µV/°C
5 µV/°C
IB
RIN
CIN
CMIR
Input Bias Current
Input Impedance
Input Capacitance
Common-Mode Input Range
VCM = 9V
2 60 nA
1 GΩ
2 pF
-0.5
+18.5
V
CMRR
Common-Mode Rejection Ratio
AVOL
Open-Loop Gain
OUTPUT CHARACTERISTICS
For VIN from -0.5V to 18.5V
0.5V ≤ VOUTx ≤ 17.5V
53 75
62 104
dB
dB
VOL
VOH
ISC
Output Swing Low
Output Swing High
Short-circuit Current
IOUT
Output Current
POWER SUPPLY PERFORMANCE
IL = -6mA
IL = +6mA
VCM = 9V, Source: VOUTx short to VS-,
Sink: VOUTx short to VS+
17.85
80
17.92
±300
150
±70
mV
V
mA
mA
(VS+) - (VS-)
IS
PSRR
Supply Voltage Range
Supply Current
Power Supply Rejection Ratio
VCM = 9V, No load
Supply is moved from 4.5V to 19V
4.5 19
12.3 15
60 75
V
mA
dB
DYNAMIC PERFORMANCE
SR Slew Rate (Note 4)
tS Settling to +0.1% (Note 5)
BW -3dB Bandwidth
www.DGaBtaWSPheet4U.comGain-Bandwidth Product
PM Phase Margin
CS Channel Separation
1V ≤ VOUTx ≤ 17V, 20% to 80%
AV = +1, VOUTx = 2V step,
RL = 1kΩ || 1kΩ (probe), CL = 1.5pF
RF = 1kΩ, CL = 1.5pF
AV = -10, RF = 1kΩ, RG = 100Ω
RL = 1kΩ || 1kΩ (probe), CL = 1.5pF
AV = -10, RF = 1kΩ, RG = 100Ω
RL = 1kΩ || 1kΩ (probe), CL = 1.5pF
f = 5MHz
100 V/µs
100 ns
60 MHz
32 MHz
50 °
90 dB
NOTES:
3. Measured over -40°C to +85°C ambient operating temperature range. See the typical TCVOS production distribution shown in the
“Typical Performance Curves” on page 6.
4. Typical slew rate is an average of the slew rates measured on the rising (20% to 80%) and the falling (80% to 20%) edges of the output signal.
5. Settling time measured as the time from when the output level crosses the final value on rising/falling edge to when the output level settles within
a ±0.1% error band. The range of the error band is determined by: Final Value(V)±[Full Scale(V)*0.1%].
5 FN6837.1
October 8, 2009
5 Page 
EL5411T
Pin Descriptions
EL5411T
EL5411T
(14 LD HTSSOP) (16 LD TQFN)
1 15
21
32
43
54
65
76
87
98
10 9
11 10
12 11
13 12
PIN
NAME
VOUTA
VINA-
VINA+
VS+
VINB+
VINB-
VOUTB
VOUTC
VINC-
VINC+
VS-
VIND+
VIND-
FUNCTION
Amplifier A output
Amplifier A inverting input
Amplifier A non-inverting input
Positive power supply
Amplifier B non-inverting input
Amplifier B inverting input
Amplifier B output
Amplifier C output
Amplifier C inverting input
Amplifier C non-inverting input
Negative power supply (connects to GND for
single supply operation)
Amplifier D non-inverting input
Amplifier D inverting input
EQUIVALENT CIRCUIT
(Reference Circuit 1)
(Reference Circuit 2)
(Reference Circuit 2)
(Reference Circuit 2)
(Reference Circuit 2)
(Reference Circuit 1)
(Reference Circuit 1)
(Reference Circuit 2)
(Reference Circuit 2)
(Reference Circuit 2)
(Reference Circuit 2)
14
14
VOUTD
Amplifier D output
(Reference Circuit 1)
13, 16
NC Not connected
pad pad Thermal Pad Functions as a heat sink.
Connects to most negative potential, VS-
www.DataSheet4U.com
VS+
VOUTx
GND
CIRCUIT 1
VS-
VINx
VS+
CIRCUIT 2
VS-
11 FN6837.1
October 8, 2009
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet EL5411T.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL5411 | (EL5111 - EL5411) 60MHz Rail-to-Rail Input-Output Op Amps | Intersil Corporation |
| EL5411T | 60MHz Rail-to-Rail Input-Output Operational Amplifier | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |