DataSheet.es    


PDF VS6 Data sheet ( Hoja de datos )

Número de pieza VS6
Descripción AC-DC / Configurable
Fabricantes Emerson 
Logotipo Emerson Logotipo



Hay una vista previa y un enlace de descarga de VS6 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! VS6 Hoja de datos, Descripción, Manual

1000 - 2500 Watts
VS Series
VS1-B2-H522-00
1100W total
VS3-D2-C2-20
1200W total
Special Features
• Power factor correction
• IEC 555-2 harmonic distortion compliance
• CISPR 22, EN55022 Level B
conducted / radiated EMI
• EN61000 immunity standards
• European CE Mark
• Current share on all outputs
• Remote sense on all outputs
• Overload protection on all outputs
• Voltage adjustment on all outputs
• Margining on all outputs
• AC-OK-signal (logics “1” or “0”)
• Global DC OK (logics “1” or “0”)
• DC-OK signal and status indicator LED-on all outputs
• Global and individual module inhibits/enable
• 3 year warranty
• 2500 W with 3-phase input
VS6-L2-00
1500W total
VS8-L9-D9-20
2500W total (case limit)
Environmental
Operating temperature: -10°C to 50°C
(derate each output linearly to 60% at 70°C)
40°C max. for reverse air (option #1)
Shock/Vibration: Mil-Hdbk 810E
Humidity: 95% non-condensing
Storage temperature: -55°C to +85°C
Temperature coefficient: 0.02% per °C
Cooling: Internal DC fan 24V
VS4/9
2000 - 2500 W
Safety
UL UL60950-1
E133211
CSA CSA C22.2 No. 60950-1-03
VDE EN60950
CB Certificate and report
CE Mark
1
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04

1 page




VS6 pdf
Drawings
VS1 & VS6 • 1000-1500 WATTS
5-inch Case Size (5” x 5” x 11”)
Input
Module
AC High
Neutral
Ground
VS1
5.00 ± 0.05
.94
23.89)
MAX
5.00
(127.03)
Max
2.04 ± .05
(51.82 ± 1.27)
J1
3.49 ± .05
(88.65 ± 1.27)
AC Main Input
Bottom
8-32 UNC-2B
Threaded Insert,
4 Places
Max penetration:
0.150 (3.81)
6.750 ± .020
(171.45 ± .50)
.750 ± .050
(19.05 ± 1.27)
4.000 ± .020
(101.60 ± .50)
.500 ± .050
(12.70 ± 1.27)
11.00 ± .05
(279.31 ± 1.27)
STD AIR FLOW
1.2
8-32 UNC-2B
Threaded Insert, 4 Places
Like Pattern Opposite Side
Max penetration: 0.150 (3.81)
Side
4.000 ± .020
(101.60 ± .50)
Back
6.750 ± .020
(171.45 ± .50)
.27 ± .05
(6.86 ± 1.27)
.500 ± .050
(12.70 ± 1.27)
.750 ± .050
(19.05 ± 1.27)
Input
Module
AC Phase A
AC Phase B
AC Phase C
AC Ground
VS6
5.00 ± 0.05
N
5.00
(127.03)
Max
2.04 ± .05
(51.82 ± 1.27)
J1
3.49 ± .05
(88.65 ± 1.27)
NOTES (ALL MODELS)
1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). For VS1, VS3 & VS4 additional GND CONN added for VS6, VS8 & VS9.
Max torque: 10 in-lbs (1.1 N-m).
2. Control connectors: (J1 and J2) 10 position Molex 90130-3210 housing, gold plated contacts. Mates with Molex 90142-0010 housing with
90119-2110 crimp contacts (Molex C - Grid III Series). Connector kit includes mating connector and 10 pins, Astec part #70-841-004.
3. Output terminals (A-300 W) (B-600 W) & (K-750 W) single modules: two (2) 10-32 UNF HEX HD BOLTS. Max. torque: 25 in-lbs (2.78 N-m).
4. Output terminals (E/F-250 W) & (G/H-500 W) dual/triple modules: Primary: two (2) 10-32 UNF HEX HD BOLTS. Max. torque: 25 in-lbs (2.78 N-m).
Secondary: barrier strip two (2) 6-32 UNC screws (0.375” centers) per output. Max torque: 10 in-lbs (1.1 N-m).
5. Output terminals (C-900 W) (D-1200 W) & (L-1500 W) single modules: four 5/16-18 x 5/8" hex head cap screws. Max. torque: 120 in-lbs
(13.35 N-m). Captive lock washer provided.
6. Chassis material: aluminum with chemical film coating.
7. Adjustment access: voltage, power fail, and overcurrent from front panel.
8. Bar code: code 39 extended.
9. Mounting for 5-inch & 8-inch case: four(4) 8-32 clinch nuts on three (3) surfaces.
Mounting for 11-inch case:
four (4) 8-32 clinch nuts on two (2) side surfaces &
six (6) 8-32 clinch nuts on bottom surface.
Max. penetration 0.150 inch (3.81). Max. torque: 15 in-lbs (1.67 N-m).
10. Additional support is recommended when unit is mounted in a suspended configuration.
Mounting clinch nuts are not designed to support the weight of the unit.
11. Fans: 5-inch case, (1) 4.5" dia, 112 CFM (no load), 49 dBA.
8-inch case, (1) 4.5" dia, 112 CFM (no load), 49 dBA; (2) 2.25” dia, 23 CFM (no load), 38 dBA.
11-inch case, (2) 4.5" dia, 112 CFM (no load), 49dBA
12. All dimensions are in inches (mm).
13. Specifications subject to change without notice.
5 Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet VS6.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
VS-100BGQ015Schottky Rectifier ( Diode )Vishay
Vishay
VS-100BGQ030Schottky Rectifier ( Diode )Vishay
Vishay
VS-100BGQ045HF4Schottky Rectifier ( Diode )Vishay
Vishay
VS-100BGQ100Schottky Rectifier ( Diode )Vishay
Vishay

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar