DataSheet.es    


PDF SC16313 Data sheet ( Hoja de datos )

Número de pieza SC16313
Descripción VFD CONTROLLER / DRIVER
Fabricantes Silan Microelectronics 
Logotipo Silan Microelectronics Logotipo



Hay una vista previa y un enlace de descarga de SC16313 (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! SC16313 Hoja de datos, Descripción, Manual

SC16313
VFD CONTROLLER / DRIVER
DESCRIPTION
SC16313 is a Vacuum Fluorescent Display (VFD) or Fluorescent
Indicator Panel (FIP) controller/driver that is driven on a 1/4 to 1/8 duty
factor. It consists of 8 segment output lines, 4 grid output lines, 4
segment/grid output lines, one display memory, control circuit, key
scan circuit. Serial data is input to SC16313 via a three-line serial
interface. This VFD driver is ideal as a peripheral device of a single-
chip microcomputer.
SOP-28-375-1.27
FEATURES
* CMOS technology
* High-voltage output
* Key scanning (8 x 2 matrix)
ORDERING INFORMATION
* Multiple display modes: (8 segments & 8 digits to 12 segments & 4
digits)
* 8-step dimming circuitry
Device
SC16313
Package
SOP-28-375-1.27
* Serial interface (CLK, DIN, DOUT, STB)
APPLICATIONS
* No external resistors needed for driver outputs
* Microcomputer peripheral device.
BLOCK DIAGRAM
DIN
DOUT
www.DataSheet4U.com
CLK
STB
OSC
R
GND
Serial
Data
Interface
Control
Display
Memory
OSC
Timing
Generator
Key Matrix
Memory
Segment Driver
SG1/KS1
SG2/KS2
SG3/KS3
SG4/KS4
SG5/KS5
SG6/KS6
SG7/KS7
SG8/KS8
SG9/GR8
SG10/GR7
SG11/GR6
SG12/GR5
Diming
Circuit
Grid
Driver
GR1
GR2
GR3
GR4
Key1 Key2
VDD GND VEE
HANGZHOU MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.2 2003.08.28
Page 1 of 10

1 page




SC16313 pdf
SC16313
data/command being transmitted is considered invalid. (However, the data/command already transmitted
remains valid)
Command 1: display mode setting command
This command initializes the SC16313 and selects the number of segments and number of grids (4 to 8
grids, 12 to 8 segments).
When this command is executed, display is forcibly turned off, and key scanning is also stopped. To resume
display, a display ON command must be executed.
SC16313 provides 4 display mode settings as shown in the diagram below. The bits 4 to 6 (b3 to b5) are
ignored, bits 7 & 8 (b6 to b7) are given a value of “0”.
On power application, the 8-digit, 8-segment mode is selected.
MSB
LSB
0 0 - - - b2 b1 b0
Don't
care
Display Mode Settings:
000: 4 digits, 12 segments
001: 5 digits, 11 segments
010: 6 digits, 10 segments
011: 7 digits, 9 segments
100: 8 digits, 8 segments
Command 2: data setting command
This command sets data write or data read modes. The data setting command, the bits 6 and 5 (b5, b4) are
ignored, bit 8 and bit 7 (b7, b6) are given the value of “01”. Please refer to the diagram below.
On power application, the normal operation mode and address increment mode are set.
MSB
LSB
0 1 - - b3 b2 b1 b0
www.DataSheet4U.com
Don't
care
Data write & read mode settings:
00: write data to display memory
10: read key data
Address increment mode settings (display
memory):
0: increment address after data has been written
1: fixes address
Test mode settings:
0: normal operation mode
1: test mode
Command 3: address setting command
This command sets an address of the display memory. The address is considered valid if it has a value of
“00H”to “0FH”. If the address is set to 10H or higher, the data is ignored until a valid address is set.
On power application, the address is set to “00H”.
Please refer to the diagram below.
MSB
LSB
1 1 0 b4 b3 b2 b1 b0
Address: 00H to 0FH
HANGZHOU MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.2 2003.08.28
Page 5 of 10

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet SC16313.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SC1631LOW VOLTAGE STEP-UP DC-DC CONVERTERSemtech Corporation
Semtech Corporation
SC1631-3CSLOW VOLTAGE STEP-UP DC-DC CONVERTERSemtech Corporation
Semtech Corporation
SC1631-5CSLOW VOLTAGE STEP-UP DC-DC CONVERTERSemtech Corporation
Semtech Corporation
SC163121/4 to 1/11 Duty VFD ControllerFUMAN ELECTRONICS
FUMAN ELECTRONICS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar