|
|
PDF SA1469TN Data sheet ( Hoja de datos )
| Número de pieza | SA1469TN | |
| Descripción | 4-CH BTL DRIVER | |
| Fabricantes | Silan Microelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SA1469TN (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
SA1469TN
4-CH BTL DRIVER FOR CD PLAYER WITH 3.3V OUTPUT VOLTAGE
DESCRIPTION
The SA1469TN, an IC for CD players, has a 4-channel BTL driver,
3.3V regulator (attached PNP transistor required), standard operational
amplifier, and internal reset output linked to an internal thermal shutdown
circuit. The driver has gain adjustment input pins for each channel,
allowing gain to be set to the desired value. Also, the internal level shift
circuit helps reduce the number of attached components.
FEATURES
HSOP - 28-375-0.8
* 1-phase, full-wave, linear DC motor driver.
* Gain is adjustable with an attached resistor.
* Internal standard operational amplifier.
* Internal 3.3V regulator. (required attached PNP transistor)
* Internal thermal shutdown circuit with hysteresis capabilities.
* When voltage of PIN23<0.7V(typ.),the driver will be muted.
ORDERING INFORMATION
Device
SA1469TN
Package
HSOP-28-375-0.8
BLOCK DIAGRAM
www.DataSheet4U.com
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http://www.silan.com.cn
REV:1.2 2008.07.23
Page 1 of 11
1 page  
2. TSD (THERMAL SHUTDOWN)
SA1469TN
1) The VREF is the output voltage of the band-gap-referenced biasing circuit and acts as the input voltage of the
TSD circuit.
2) The base-emitter voltage of the TR, Qn is designed to turn-on at below voltage.
VBE=VREF * R2/(R1+R2)=460mV
3) When the chip temperature rises up to 175°C, then the turn-on voltage of the Qn would drop down to 460mV.
(Hysteresis: 25°) and, the Qn would turn on so the output circuit will be muted.
3. OP-AMP
OP-Amp is integrated in the IC for user convenuence.
OPIN(+)
OPIN(-)
OPOUT
Pins 14, 15 and 16 may be left open when the operational amplifier is not used.
4. DRIVER
www.DataSheet4U.com
1) The voltage, VREF, is the reference voltage given by the BIAS voltage of the pin # 23.
2) The input signal through the pin # 3 is amplified by 10K/10K times and then fed to the level shift.
3) The level shift produces the current due to the difference between the input signal and the arbitrary reference
signal. The current produced as +ΔV and -ΔV is fed into the driver buffer.
4) Driver buffer operates the power TR of the output stage according to the state of the input signal.
5) The output stage is the BTL driver and the motor is rotating in forward direction by operating TR Q1 and TR
Q4. on the other hand, if TR Q2 and TR Q3 is operating, the motor is rotating in reverse direction.
6) When the input voltage through the pin # 3 is below the VREF, then the direction of the motor in forward
direction.
7) When the input voltage through the pin # 3 is above the VREF, then the direction of the motor in reverse
direction.
8) If it is desired to change the gain, then the pin # 4 or # 24 can be used.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http://www.silan.com.cn
REV:1.2 2008.07.23
Page 5 of 11
5 Page 
ATTACH
Revision History
Data
2007.08.03
REV
1.0
2007.10.26
1.1
2008.07.23
1.2
Description
Original
Add the” Power dissipation curve”
Modify the “Electrical Characteristics ”
Modify the “Power dissipation curve”
SA1469TN
Page
2
www.DataSheet4U.com
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http://www.silan.com.cn
REV:1.2 2008.07.23
Page 11 of 11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SA1469TN.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SA1469TN | 4-CH BTL DRIVER | Silan Microelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |