|
|
PDF SC2642 Data sheet ( Hoja de datos )
| Número de pieza | SC2642 | |
| Descripción | Multi-Platform Two-Phase PWM Controller | |
| Fabricantes | Semtech Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SC2642 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
POWER MANAGEMENT
Description
The SC2642 provides microprocessor core voltage
regulation solution with two paralleled PWM channels.
Multi-phase buck regulator utilizes the phase-shift tim-
ing control to allow interleaved switching of the power
switches. This architecture minimizes the core voltage
ripple and the input current ripple, which leads to opti-
mized voltage regulator design for power density, tran-
sient responses, and the thermal performances.
To satisfy the highly dynamic nature of the modern
microprocessors, the SC2642 adopts peak current mode
control topology which ensures wide control loop band-
width and fast transient responses. The current mode
control provides intrinsic phase current matching. The
maximum ripple frequency is greater than 1MHz.
One of the outstanding features of the SC2642 is its volt-
age regulation accuracy. Not only it provides better than
1% set point accuracy, but also the accuracy to fully com-
plaint with the stringent load line slope specifications
mandated by the modern microprocessors.Lossless out-
put current sensing ensures the regulator output voltage
is accurately positioned according to the load current con-
dition, and an internal temperature compensation tech-
nology further enhances the performance of voltage ac-
curacy.
The patented Combi-SenseTM topology is employed by
SC2642. The MOSFET Rds(on) and the output inductor
winding resistance are used to generate the phase cur-
rent information. The Combi-SenseTM MOSFET driver plus
the SC2642 enables the complete solution.
SC2642
Multi-Platform
Two-Phase PWM Controller
The VID structure of the SC2642 supports VID-on-Fly ap-
plications for any platform. The cycle-by-cycle current limit
plus the intelligent over current shut down provide the
maximum versatility of the system without false tripping
under all possible changes of VID and load conditions.
The differential voltage feedback sense eliminates the
error caused by high load current on the ground plane.
External offset is easy to achieve for any platforms and
the VID settings. The enable function is also provided to
interface with the corresponding system signal for correct
start up timing and shut down timing.
Features
! VRD/VRM10.0, VRM9.X, and K-8 compliant
! Core Voltage Set Point Accuracy 0.5%
! Combi-SenseTM Current Mode Control
! Intrinsic Phase Current Matching
! Fast Transient Responses
! Active Droop with Temperature Compensation to Meet
Load Line Slope
! Support VID-on-Fly with 5 or 6 bit VID
! Enable Function for Power Sequencing
! Cycle-by-Cycle Peak Current Limit
! Intelligent Over Current Shut Down
! Over Voltage Protection When Using Semtech
Combi-SenseTM Driver SC1211
! Under Voltage Protection Built in
! External programmable Soft-Start
! Externally programmable switching frequency (up to
1MHz output ripple frequency)
The SC2642 is a multi-platform controller. It conforms to
Intel VRM/VRD10.0, VRM9.X, and AMD K-8 (OpteronTM)
VID specifications. With very minor changes of the sche-
matic and the layout, the SC2642 based solution can be
ported form one platform to another. This greatly ben-
efits the system manufactures for reductions of design
cycle and minimize the inventory management.
Applications
! Voltage Regulator VRD10.x
! Voltage Regulator VRM9.X
! Voltage Regulator K-8
! High Current, Low Voltage Step Down DC/DC
Converters
April 22, 2005
1 www.semtech.com
1 page  
wwPw.ODaWtaSEhReetM4U.AcoNmAGEMENT
Pin Configurations
Top View
SC2642
Ordering Information
Part Number
SC2642TSTR(1)
Package
TSSOP-20
Temp. Range (T )
J
0 to 125 OC
SC2642TSTRT(1)(2)
TSSOP-20
0 to 125 OC
SC2642EVB
Evaluation Board
Note:
(1) Only available in tape and reel packaging. A reel contains 2500 devices.
(2) Lead free package. Device is fully WEEE and RoHS compliant.
(20-Pin TSSOP)
Pin Descriptions
Pin#
Pin Name
Pin Function
1
OS1
Current sense input 1.
2 BGOUT BG reference pin. Connect soft start cap to AGND.
3 ERROUT Error-amplifier output. Connect compensation network to AGND.
4 GSENSE Remote sense for GND. Rout with FB trace as a differnetial pair to the CPU socket.
5 FB Feedback pin.
6 DACSTEP VID step speed setting. Connect a cap to AGND to program the DAC slew rate.
7
VCC
Power supply for chip.
8
VID4
VID MSB.
9 VID3
10 VID2
11 VID1
12
VID0
VID LSB.
13
VID5
12.5mV bit for VR10. VID5 pull-up to VCC for K-8; VID5 pull-up to 5V for VRM9.X.
14 PGOOD Power good. Open Collect output.
15 OSCREF Oscillator frequency setting. Connect a resistor to AGND.
16 AGND Clean ground for analog signals.
17 OUT1 PWM output1.
18 OUT2 PWM output2.
19 OUTSEN Direct output sense.
20
OS2
Current sense input 2.
2005 Semtech Corp.
5
www.semtech.com
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet SC2642.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SC2642 | Multi-Platform Two-Phase PWM Controller | Semtech Corporation |
| SC2643VX | Multi-Platform Multi-Phase PWM Controller | Semtech Corporation |
| SC2646B | Combi-Sense PWM Controller | Semtech Corporation |
| SC2647 | Multi-Platform Multi-Phase PWM Controller | Semtech Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |