|
|
PDF NJL6167R-1 Data sheet ( Hoja de datos )
| Número de pieza | NJL6167R-1 | |
| Descripción | Photo Diode | |
| Fabricantes | JRC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NJL6167R-1 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
HIGH SPEED PIN PHOTO DIODE
NJL6167R-1
GENERAL DESCRIPTION
The NJL6167R-1 are the high speed PIN
photo diode (fc : 450MHz at λ=780nm,
500MHz at λ=650nm).
It shrinks the outline by COBP(Chip on Board
Package), and attain under half package
volume compared with lead frame type.
OUTLINE (typ.) Unit : mm
NJL6167R-1
(0.6)
Active area
1.8
Active area: 1.2X0.4mm
1.16
0.5
1.0
0.3
FEATURES
• High speed
450MHz at λ=780nm
500MHz at λ=650nm
• Miniature, thin type
1.8mmX3.6mmX1.16mm
anode
cathode
(0.26)
1.0 (2x)R0.3
APPLICATIONS
• Laser monitor for CD-R/RW, DVD+/-R/RW/-RAM, recordable MD
etc.
• Reading the signal for optical communication
etc.
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
Reverse Voltage
Operating Temperature
Storage Temperature
Reflow Soldering Temperature
SYMBOL
VR
Topr
Tstg
Tsol
RATINGS
35
-30 to +85
-40 to +100
260
UNIT
V
°C
°C
°C
ELECTRO-OPTICAL CHARACTERISTICS (Ta=25°C)
PARAMETER
Dark Current
Forward Voltage
Capacitance
Peak Wavelength
Sensitivity
Cut off Frequency
SYMBOL
ID
VF
Ct
λP
S
fc
TEST CONDITION
VR=10V
IF=1mA
VR=2.0V, f=1MHz
—
VR=2.0V, λ=780nm
VR=2.0V, λ=650nm
VR=2.0V, λ=780nm, RL=50Ω, -3dB
VR=2.0V, λ=650nm, RL=50Ω, -3dB
MIN TYP MAX UNIT
— 0.1 2.0 nA
— — 1.0 V
— 4 — pF
— 800 — nm
0.38 0.47 — A/W
0.32 0.40 — A/W
— 450 — MHz
— 500 — MHz
-1-
1 page  
www.DataSheet4U.com
NJL6167R-1
NJL6167R-1 Taping Specification
(TE1)
1. Taping Size
1) Carrier tape is used with Styrene type Carbonated Plastic.
2) Cover tape is used with electro statistically prevention treated Polyester type tape.
3) Product taping direction is to place the index mark against the pull out direction of the tape as in the drawing.
Pull out direction of tape
2.0
4.0
Unit:mm
0.3
2.4
4.0
1.5
Carrier tape
Cover tape
2. Taping Strength
Pull up the cover tape from the carrier tape, and when the opening angle comes around 10 to 15°, and the peeling-off
strength is to be within the power of 20 to 70g.
3. Packaging
1) The taped products are to be rolled up on the taping reel as on the drawing.
2) Rolling up specification
2-1) Start Rolling: Carrier tape open space more than
Label
20 Pieces.
2-2) End of Rolling: Carrier tape open space more than
20 Pieces, and 2 round of reel space at the cover tape only.
3) Taping quantity: 2,000 Pieces
4) Seal off after putting each reels in a damp proof bag with
Silica gel (3 bags).
Unit:mm
13
-5-
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet NJL6167R-1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NJL6167R-1 | Photo Diode | JRC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |