|
|
PDF NJL6501R-3 Data sheet ( Hoja de datos )
| Número de pieza | NJL6501R-3 | |
| Descripción | Ambient Light Sensor | |
| Fabricantes | JRC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NJL6501R-3 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Ambient Light Sensor
NJL6501R-3
■ GENERAL DESCRIPTION
The NJL6501R-3 is the ambient light sensor with optical filter to solve the interference problem by the infrared.
Also, the spectral response is close to human eye.
■ FEATURES
1. Peak wavelength
2. Spectral range
3. Photo current
4. Illuminance linearity
5. COBP
560 nm
350 to 650 nm
270nA ±15%
0.1 to 100,000 Lux Condition : VR=0V, Ta=25°C
Package size : 2.0 x 2.0 x 0.65 mm
■ APPLICATIONS
Cellular phone, PDA, Note PC, TV, PDP, Clock, Refrigerator, Camera, Toy, Room light, Street light, etc.
to adjust the luminance of display
to control ON/OFF
Replacement of CdS
■ ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
Reverse Voltage
Operating Temperature
Storage Temperature
Soldering Temperature
SYMBOL
VR
Topr
Tstg
Tsol
RATINGS
3.6
−40 to +85
−40 to +100
260
UNIT
V
°C
°C
°C
■ ELECTRO-OPTICAL CHARACTERISTICS (Ta=25°C)
PARAMETER
Forward Current
Dark Current
Photo Current
Peak Wavelength
SYMBOL
VF
ID
IL
IL2/I L1
λP
TEST CONDITION
IF=1mA, Ev=0Lux
VR=1V, Ev=0Lux
Ev=1000Lux, Fluorescent light
I L1: Fluorescent light,
IL2: Incandescent light
⎯
MIN TYP MAX UNIT
⎯ ⎯ 0.85 V
⎯ 0.1 ⎯ nA
230 270 310
nA
⎯ 1.4 ⎯
⎯ 560 ⎯ nm
Ver.2007-02-08
-1-
1 page  
www.DataSheet4U.com
NJL6501R-3 Taping Specification
NJL6501R-3
(TE1)
1. Taping Size
1) The material of carrier tape is styrene type plastic with carbon.
2) The cover tape is polyester type with electro statistically prevention.
3) The pull out direction of the tape is as follows.
Pull out direction
2.0 4.0
1.5
UNIT : mm
0.25
2.2
4.0
Carrier Tape Cover Tape
0.85
(1.162)
2. Taping Strength
The peeling-off strength is 20 to 70g in case the cover tape is pulled up from the carrier tape with opening angle 10 to 15
degree.
3. Packing
1) The taped products are rolled up on the taping reel as follows.
2) Rolling up specification
2-1) Start rolling
: Carrier tape open space is more than 20 pieces.
2-2) End of rolling
: Carrier tape open space is more than 20 pieces with 2 rounds of cover tape.
3) Taping quantity
: 2,000 pieces.
4) Each reel is sealed in a damp proof bag with one bag of silica gel.
Label
8.5
Ver.2007-02-08
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
-5-
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet NJL6501R-3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NJL6501R-3 | Ambient Light Sensor | JRC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |