|
|
PDF PDG-02A Data sheet ( Hoja de datos )
| Número de pieza | PDG-02A | |
| Descripción | 0 POWER DIVIDERS / COMBINERS | |
| Fabricantes | Merrimac Industries | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PDG-02A (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
PDG-02A Series
0 POWER DIVIDERS / COMBINERS
10 to 1000 MHz / 2-Way / Broadband / Minimal Size and Weight / Low 0.2" Profile / Surface Mount
www.datasheet4u.com
Model
Number
PDG-02A-250
PDG-02A-500
Frequency
Range,
MHz
10 - 500
50 - 1000
PRINCIPAL SPECIFICATIONS
Isolation,
dB,
Min. Typ.
Insertion
Loss, dB,
Max. Typ.
Amplitude
Balance, dB,
Max. Typ.
20 25 1.0 0.5 0.2 0.1
18 25 1.5 1.0 0.3 0.2
Phase
Balance,
Max. Typ.
2° 1°
4° 2°
VSWR
Max. Typ.
1.5:1 1.3:1
1.5:1 1.3:1
General Notes:
1. The basic power divider is a hybrid junction with one of its ports internally
terminated. For in-phase power division, such as provided in the PDG-02A series,
the E port is internally terminated.
2. Careful design and construction insure phase and amplitude uniformity between
units. Additionally, these units provide excellent transfer phase linearity and
amplitude flatness. These characteristics are of critical importance to the success-
ful design of modern multi-channel receivers, transmitters and antenna systems.
3. Merrimac Power Dividers/Combiners are available in a variety of packages to
suit most requirements. The surface mounted versions in the PDG-02A series use
lumped element design. This approach is particularly appropriate for those appli-
cations where small size is important.
GENERAL SPECIFICATIONS
Impedance:
50 Ω nom.
Coupling (Theoretical): -- 3.0 dB
CW Input Power:
250 mW max.
(When used as divider with 1.2:1 VSWRout)
Internal Load Dissipation: 28 mW max.
Weight, nominal:
0.02 oz. (0.5 g)
Operating Temperature: -- 55° to + 85°C
Surface Mount A-Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. All unmarked tabs are ground.
26Apr96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet PDG-02A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PDG-02A | 0 POWER DIVIDERS / COMBINERS | Merrimac Industries |
| PDG-02B | 0 POWER DIVIDERS / COMBINERS | Merrimac Industries |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |