|
|
PDF KH220 Data sheet ( Hoja de datos )
| Número de pieza | KH220 | |
| Descripción | Fast Settling Wideband Op Amp | |
| Fabricantes | Cadeka | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KH220 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
KH220
Fast Settling Wideband Op Amp
www.datasheet4u.com
www.cadeka.com
Features
I -3dB bandwidth of 190MHz
I 0.1% settling in 8ns
I 7000V/µs slew rate
I 1.9ns rise and fall times
I Low distortion, linear phase
I Direct replacement for CLC220
Applications
I Very high-speed A to D, D to A conversion
I High-speed fiber optic systems
I Baseband and video communications
I Radar and IF processors
I Very fast risetime pulse amplifiers
Bottom View
Typical Performance
General Description
The KH220 is a wide bandwidth DC-coupled operational
amplifier that defines the state-of-the-art in high
speed op amps. A -3dB bandwidth of DC to 190MHz
is achieved using a current feedback architecture
design. Ultra-fast settling time (8nsec to 0.1%) and
slew rate (7000V/µsec) make the KH220 a superior
amplifier for pulsed and digital applications.
Since thermal tail has been eliminated, the KH220
settles fast and remains solidly at the desired level.
Flat gain and linear phase (1.2° deviation from linear)
from DC to beyond 100MHz help the KH220 to
achieve distortion levels uncommonly low relative to
conventional op amps.
Using the KH220 is as easy as adding power supplies
and a gain-setting resistor. The result is reliable,
consistent performance because such characteristics as
bandwidth and settling time are virtually independent
of gain setting. Unlike conventional op amp designs
where the optimum gain-bandwidth product occurs
at a high gain, minimum settling time at a gain of -1,
maximum slew rate at a gain of +1, et cetera, the
KH220 offers predictable response at gain settings
from ±1 to ±50. This, coupled with consistent perfor-
mance from unit to unit with no external
compensation, makes the KH220 a real time and cost-
saver in design and production situations alike.
This combination of features makes the KH220
appropriate for a broad range of applications. The
wide bandwidth, DC coupling, and fast settling lend
themselves well to high speed D to A and “flash” A to
D applications. Both receivers and transmitters in
optical fiber systems have similar requirements. High
gain and phase linearity and corresponding low
distortion make the KH220 ideal for many digital
communication system applications, such as in the
demodulator, where the need for both DC coupling
and high frequency amplification creates require-
ments that are difficult to meet.
The KH220 is constructed using thin film resistor/bipolar
transistor technology, and available in these versions:
KH220AI
KH220AK
KH220AM
-25°C to +85°C
-55°C to +125°C
-55°C to +125°C
KH220HXC -55°C to +125°C
KH220HXA -55°C to +125°C
12-pin TO-8 can
12-pin TO-8 can, features
burn-in & hermetic testing
12-pin TO-8 can,
environmentally
screened and electrically
tested to MIL-STD-883
SMD#: 5962-8991101HXC
SMD#: 5962-8991101HXA
REV. 1A January 2004
1 page  
DATA SHEET
KH220 Package Dimensions
A
www.datasheet4u.com
φD D1
F
L
φb
e1
789
e2
6 10
e 5 11
4 12
321
kα
k1
SYMBOL
A
φb
φD
φD1
e
e1
e2
F
k
k1
L
α
TO-8
INCHES
MILIMETERS
Minimun Maximum Minimum Maximum
0.142
0.181
3.61
4.60
0.016
0.019
0.41
0.48
0.595
0.605
15.11
15.37
0.543
0.555
13.79
14.10
0.400 BSC
10.16 BSC
0.200 BSC
5.08 BSC
0.100 BSC
2.54 BSC
0.016
0.030
0.41
0.76
0.026
0.036
0.66
0.91
0.026
0.036
0.66
0.91
0.310
0.340
7.87
8.64
45° BSC
45° BSC
NOTES:
Seal: cap weld
Lead finish: gold per MIL-M-38510
Package composition:
Package: metal
Lid: Type A per MIL-M-38510
KH220
Life Support Policy
Cadeka’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of Cadeka Microcircuits, Inc.
As used herein:
1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or sustain life, and whose failure to perform, when properly used
in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect
its safety or effectiveness.
Cadeka does not assume any responsibility for use of any circuitry described, and Cadeka reserves the right at any time without notice to change said circuitry and specifications.
www.cadeka.com
© 2004 Cadeka Microcircuits, LLC
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet KH220.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KH220 | Fast Settling Wideband Op Amp |  Fairchild Semiconductor |
| KH220 | Fast Settling Wideband Op Amp | Cadeka |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |