DataSheet.es    


PDF SC-AK500 Data sheet ( Hoja de datos )

Número de pieza SC-AK500
Descripción (SC-AKxx0 ) CD Stereo System
Fabricantes Panasonic 
Logotipo Panasonic Logotipo



Hay una vista previa y un enlace de descarga de SC-AK500 (archivo pdf) en la parte inferior de esta página.


Total 32 Páginas

No Preview Available ! SC-AK500 Hoja de datos, Descripción, Manual

www.datasheet4u.com
The illustrations show SC-AK500.
CD Stereo System
Operating Instructions
Model No. SC-AK500
SC-AK490
SC-AK300
SC-AK200
P PC
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
RQT6085-4P

1 page




SC-AK500 pdf
wwLw.idsattaeshneeitn4ug.comcaution
Selecting fine audio equipment such as the unit you’ve just pur-
chased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries Associ-
ation’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion—and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
Placement of speakers
SC-AK500 SC-AK490 SC-AK300
Place the speakers so that the super tweeter is on the outside.
Super tweeter
About the remote control
Battery installation
SC-AK500 SC-AK490
R6/LR6, AA, UM-3
SC-AK300 SC-AK200
R6, AA, UM-3
Use of batteries
Align the poles (+ and –) properly when inserting the batteries.
Do not mix old and new batteries or different types of batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
Remove the batteries if the unit is not to be used for a long time.
Do not keep together with metallic objects such as necklaces.
Do not use rechargeable type batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Remote control
signal sensor
SC-AK200
Speakers are designed identically so that no left or right channel
orientation is necessary.S
30˚
Transmission
window
30˚
About 7 meters in front of
the signal sensor
Notes
Keep your speakers at least 10 mm (13/32˝) away from the system for
proper ventilation.
These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
Operation notes
Do not place obstacles between the remote control signal sensor
and remote control unit.
Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
If this system is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote control
a shorter distance from the system.
To prevent damage
Never place heavy items on top of the unit.
Do not disassemble or reconstruct the unit.
Do not spill water or other liquids into the unit.
5
RQT6085

5 Page





SC-AK500 arduino
www.datasheet4u.com
A
B
1
3
1
2
3
4 CLOCK/
TIMER
SLEEP
AUTO OFF
24
A Auto-off function
Remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
Note
This function does not work if the source is tuner or AUX.
Press and hold [AUTO OFF].
AUTO OFFis shown on the display.
To cancel
Press and hold [AUTO OFF] again to clear AUTO OFFfrom the
display.
For your reference
The setting is maintained even if the unit is turned off. When the unit is
turned on again, AUTO OFFis displayed and the unit functions as
described above.
AUTO OFFdisappears from the display if either tuner or AUX is
selected as the source but continues to function normally.
AUTO OFFremains displayed if CD or tape is selected as the
source.
B Setting the time
Remote control only
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
1 Switch on the power.
2 Press [CLOCK/TIMER] to select
CLOCK.
Every time you press the button:
CLOCK
PLAY
REC
Previous display
3 (within 7 seconds or so)
Press [g/REW/4] or [3/FF/f] to
set the present time.
4 Press [CLOCK/TIMER] to finish setting
the time.
The display will return to whatever was displayed before you
set the time.
To display the time when system is ON
Press [CLOCK/TIMER] to select CLOCK.
To display the time when system is OFF
Press [CLOCK/TIMER].
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Note
The clock may lose or gain some time over a period. Readjust if
necessary.
11
RQT6085

11 Page







PáginasTotal 32 Páginas
PDF Descargar[ Datasheet SC-AK500.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SC-AK500(SC-AKxx0 ) CD Stereo SystemPanasonic
Panasonic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar