|
|
PDF SDXxxxA2 Data sheet ( Hoja de datos )
| Número de pieza | SDXxxxA2 | |
| Descripción | Pressure Sensor | |
| Fabricantes | Sensym | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SDXxxxA2 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
SDX SERIES
Lowwww.DataSheet4U.com Cost Compensated Pressure Sensors in DIP Package
FEATURES
· 0 to 1 psi to 0 to 100 psi
· Low Cost DIP Package
· Temperature Compensation
· Calibrated Zero and Span
· Small Size
· Low Noise
· High Impedance for
Low Power Applications
APPLICATIONS
· Medical Equipment
· Computer Peripherals
· Pneumatic Controls
· HVAC
GENERAL
DESCRIPTION
The SDX series sensors will provide a
very cost effective solution for pressure
applications that require small size plus
performance. These internally calibrated
and temperature compensated sensors
give an accurate and stable output over a
0°C to 50°C temperature range. This series
is intended for use with non-corrosive, non-
ionic working fluids such as air and dry
gases.
Devices are available to measure abso-
lute, differential and gage pressures from
1 psi (SDX01) up to 100 psi (SDX100). The
Absolute (A) devices have an internal
vacuum reference and an output voltage
proportional to absolute pressure.
The output of the bridge is ratiometric to
the supply voltage and operation from any
D.C. supply voltage up to +20 V is
acceptable.
The SDX devices feature an integrated
circuit sensor element and laser trimmed
thick film ceramic housed in a compact sol-
vent resistant case. This package provides
excellent corrosion resistance andisolation
to external package stresses. The DIP
package also provides convenient mounting
and pressure ports for ease of use with
Scale:
1 cm
½ inch
standard plastic tubing for pressure
connection.
All SDX devices are calibrated for span
to within 3.5% and provide an offset (zero
pressure output) of ±1 millivolt maximum.
These parts were designed for low cost
applications where the user can typically
provide fine-adjustment of zero and span
in external circuitry. For higher accuracies,
refer to the standard SCX series datasheet.
EQUIVALENT CIRCUIT
ELECTRICAL CONNECTION
Note:
SDXxxxG2
SDXxxxA2
Top View
The polarity identicated is for pressure applied to
SDXxxxG2:
P2 (backward gage)
SDXxxxA2:
P1 (forward gage)
SDXxxxD4:
P2 (backward gage)
SDXxxxD4
March 1998/062
Aubinger Weg 27, 82178 Puchheim, Germany
Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33
http://www.sensortechnics.com
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet SDXxxxA2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SDXxxxA2 | Pressure Sensor | Sensym |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |