DataSheet.es    


PDF LM111 Data sheet ( Hoja de datos )

Número de pieza LM111
Descripción Voltage comparator
Fabricantes NXP Semiconductors 
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de LM111 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! LM111 Hoja de datos, Descripción, Manual

Philips Semiconductors Linear Products
Voltage comparator
Product specification
LM111/211/311/
LM311B
DESCRIPTION
The LM111 series are voltage comparators that have input currents
approximately a hundred times lower than devices like the µA710.
They are designed to operate over a wider range of supply voltages;
from standard ±15V op amp supplies down to a single 3V supply.
Their output is compatible with RTL, DTL, and TTL as well as MOS
circuits. Further, they can drive lamps or relays, switching voltages
up to 50V at currents as high as 50mA.
Both the inputs and the outputs of the LM111 series can be isolated
from system ground, and the output can drive loads referred to
ground, the positive supply, or the negative supply. Offset balancing
and strobe capability are provided and outputs can be wire-ORed.
Although slower than the µA710 (200ns response time vs 40ns), the
devices are also much less prone to spurious oscillations. The LM111
series has the same pin configuration as the µA710 series.
FEATURES
Operates from single 3V supply (LM311B)
Maximum input bias current: 150nA (LM311—250nA)
Maximum offset current: 20nA (LM311—50nA)
Differential input voltage range: ±30V
Power consumption: 135mW at ±15V
High sensitivity—200V/mV
Zero crossing detector
PIN CONFIGURATION
D, FE, N PACKAGES
GND 1
INPUT 2
INPUT 3
V– 4
+
8 V+
7 OUTPUT
6 BAL/STROBE
5 BALANCE
APPLICATIONS
Precision squarer
Positive/negative peak detector
Low voltage adjustable reference supply
Switching power amplifier
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Small Outline Package (SO)
8-Pin Plastic Dual In-Line Package (DIP)
TEMPERATURE RANGE
-55°C to +125°C
-25°C to +85°C
0 to +70°C
0 to +70°C
-25°C to +85°C
-55°C to +125°C
0 to +70°C
0 to +70°C
ORDER CODE
LM111N
LM211N
LM311D
LM311N
LM211D
LM111FE
LM311BD
LM311BN
DWG #
0404B
0404B
0174C
0404B
0174C
0580A
0174C
0404B
August 31, 1994
273 853-0927 13721

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet LM111.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LM110Voltage FollowerNational Semiconductor
National Semiconductor
LM1100Full Size HCMOS/TTL Compatible OscillatorsGeneral Electric Company
General Electric Company
LM1101N5300mA High PSRR Low Noise LDOCYStech Electronics
CYStech Electronics
LM1108FC-MOS L.D.O. RegulatorHTC
HTC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar