|
|
Número de pieza | OPI155 | |
Descripción | High Speed Op tically Cou pled Isolator | |
Fabricantes | OPTEK Technologies | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de OPI155 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Product Bulletin OPI155
November 2000
High Speedwww.DataSheet4U.com Optically Coupled Isolator
Type OPI155
Dimensions are in inches (millimeters).
Features
•50 kV electrical isolation
• High speed >5MBd
•Hermetically sealed LED and
photosensor
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Input-to-Output Isolation Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 kV
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Lead Soldering Temperature (1/16 inch [1.6 mm] from case for 5 sec. with soldering
iron). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Description
The OPI155 contains a high speed
monolithic photo-IC comprised of a
photodiode and DC amplifier driving an
open collector output Schottky transistor.
It is optically coupled by means of an
internal light pipe and mounted in a high
dielectric plastic housing. The LED and
sensor are in hermetically sealed
packages. It is designed for applications
requiring high speed and high voltage
isolation between input and output.
Input Diode
Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V
Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW
Output Phototransistor
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 7.0 V
Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 18.0 V
Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA
Open Collector Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mW
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow
soldering.
(2) Derate linearly mW/°C above 25°C.
(3) Measured with input and output leads shorted and relative humidity of less than 50%.
This device is susceptible to damage from electrostatic discharge (ESD). Normal static
precautions should be taken in the handling of this device to prevent ESD damage.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
13
(972) 323-2200
Fax (972) 323-2396
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet OPI155.PDF ] |
Número de pieza | Descripción | Fabricantes |
OPI150 | (OPI150 / OPI153) Optically Coupled Isolators | OPTEK Technologies |
OPI153 | (OPI150 / OPI153) Optically Coupled Isolators | OPTEK Technologies |
OPI155 | High Speed Op tically Cou pled Isolator | OPTEK Technologies |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |