DataSheet.es    


PDF KDC-MP828 Data sheet ( Hoja de datos )

Número de pieza KDC-MP828
Descripción (KDC-xxxx) CD Receiver Manual
Fabricantes Kenwood 
Logotipo Kenwood Logotipo



Hay una vista previa y un enlace de descarga de KDC-MP828 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! KDC-MP828 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
CD-RECEIVER
KDC-X889
KDC-MP828
KDC-MP7028
KDC-MP728
KDC-X789
KDC-MP628
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD dealer for information or service on the product.
Model KDC-X889/MP828/MP7028/MP728/X789/MP628 Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.kenwoodusa.com
© B64-2962-20/02 (KW)

1 page




KDC-MP828 pdf
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
Reset button
www.DataSheet4U.com
Reset button
• We recommend the use of <Security Code>
(page 42) to prevent theft.
• The characters which can be displayed by ISO
8859-1.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 50).
About ODD (Offset Dual Differential) D/A
System (KDC-X889/KDC-MP828)
The high quality sound play is to be done by ODD
D/A System. Dual D/A converters are built-in the
ODD D/A System, and the digital processing is
isolated and controlled separately for front channel
so the channel separation is improved sharply.
Also, it produces the data in which the sound data
is offset on the minus side and converts the two
signals (original and offset data) to the analog
signal, which has less noise and distortion, by the
synthetic process.
However, ODD D/A System has no effect during the
following conditions.
- When "2 ZONE" of <Audio Setup> (page 13) is
"ON".
- When <Bypass Control> (page 17) is "Bypass".
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
English | 5

5 Page





KDC-MP828 arduino
1 Select the source for adjustment
Press the [SRC] button.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Basic Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4 Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Rear Volume *1 "Rear Volume" 0 — 35
Subwoofer level*2,3,4 "Sub-WLevel" –15 — +15
Bass level*5
"Bass Level" –8 — +8
Middle level*5
"Middle Level" –8 — +8
www.DataSTrehbeleeletv4elU*5 .com "Treble Level" –8 — +8
Balance
"Balance" Left 15 — Right 15
Fader*4
"Fader"
Rear 15 — Front 15
Exit Audio Control mode
• *1 You can control this item when "2 ZONE" of <Audio
Setup> (page 12) is set to "ON".
• *2 You can control this item when <Switching preout>
(page 43) is set to "SWPRE Sub-W". (KDC-MP728/
KDC-MP628 only)
• *3 You can control this item when <Subwoofer
Output> (page 14) is set to "SW ON".
• *4 You can control this item when "2 ZONE" of <Audio
Setup> (page 12) is set to "OFF".
• *5 These items can be adjusted in detail by the
following methods. (Function of the KDC-X789)
• *5 Source tone memory: The set up value is put in the
memory per source. (Detail Audio item is included)
5 Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT]/[ANG] button.
Adjust the detail of Audio Control
(Function of the KDC-X789)
1 Select the Audio item for adjustment
By referring to the step 1 — 3 above, select the
desired item to be set in detail from the items
marked with *5.
2 Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3 Select the Detail Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that
can be adjusted switch as shown below.
4 Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item Display Range
Bass Center Frequency
Bass Q Factor
Bass Extend
"Bass FRQ" 40/50/60/70/80/100/
120/150 Hz
"Bass Q Factor" 1.00/1.25/1.50/2.00
"Bass EXT" OFF/ON
Middle level
Adjustment Item Display
Range
Middle Center
Frequency
"Middle FRQ" 0.5/1.0/1.5/2.0 kHz
Middle Q Factor "Middle Q Factor" 1.00/2.00
Treble level
Adjustment Item Display Range
Treble Center Frequency "Treble FRQ" 10.0/12.5/15.0/17.5 kHz
5 Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
• When the Bass Extend is set to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [VOL] and [ATT]/[ANG]
buttons.
English | 11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet KDC-MP828.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
KDC-MP828(KDC-xxxx) CD Receiver ManualKenwood
Kenwood

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar