|
|
PDF QT2021 Data sheet ( Hoja de datos )
| Número de pieza | QT2021 | |
| Descripción | 10 Gb/s Ethernet And Fibre Channel PHY Transceiver Chip | |
| Fabricantes | Quake Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de QT2021 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
THE HIGHLY INTEGRATED SINGLE-CHIP QT2021 LOWERS COST, REDUCES
POWER AND IMPROVES RELIABILITY
WHILE OFFERING UNPRECEDENTED 10 GB/S PERFORMANCE AND
SUPERB JITTER TOLERANCE
www.DataSheet4U.com
ADVANCED
PRODUCT SHEET
QT2021
10 GB/S SERIAL TO XAUI TRANSCEIVER FOR
ETHERNET AND FIBRE CHANNEL APPLICATIONS
WHAT IT GIVES YOU:
A high level of integration and
an array of well-planned,
high-performance, fully IEEE
802.3ae, XENPAK, XPAK
and X2 compliant features
facilitate the design of 10
Gb/s Ethernet and Fibre
Channel systems.
WHAT IT DOES:
The QT2021 converts a 10
Gb/s serial data stream into
four 3.125/3.1875 Gb/s serial
lanes via the IEEE specified
XAUI (10 Gb/s attachment
unit interface) data bus.
The QT2021 exceeds the
IEEE 802.3ae requirements
for receiver jitter tolerance,
with the demonstrated ability
to successfully recover clock
and data in stressed eye
testing. Superior fiber and
XAUI eye quality ensure best
overall system performance.
Support for EEPROM
interface provides rapid, easy
initialization of the device.
Fully integrated test features
enable quick evaluation and
faster time to market. Five
loopback modes are available
to facilitate lab and system
diagnostics. PC-based GUI
available for graphical MDIO access.
SOME KEY FEATURES:
— Operation at 10.3 and 10.5 Gb/s data rates
— On-chip clock generation and data recovery
— XAUI interface with channel skew control and
adjustable output amplitude
— Differential 10 Gb/s output with adjustable
amplitude
— 64b/66b and 8b/10b encoding and decoding
— Integrated limiting amplifier (LA) and built-in
equalization on receiver side
— MDC/MDIO and EEPROM interfaces
— Support for IEEE 802.3ae and XENPAK
alarms (LASI)
— Support for Digital Optical Monitoring (DOM)
— Low power mode, power supply monitoring
— BER monitor, synchronization/lock indicator
— Multiple testability and loopback features
— CJPAT generator for XAUI testing
— Scrambler/descrambler bypass mode
— Transmit and recovered 156 MHz PECL
output clock
— 15x15mm or 19x19mm BGA package
IDEAL FOR:
10 Gb/s Ethernet (IEEE 802.3ae) and Fibre
Channel (10GFC) applications. XENPAK, XPAK
and X2 modules. Can be used on line cards that
incorporate XFP module.
Product Sheet Rev 1.1
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet QT2021.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| QT2020 | 10 Gb/s Ethernet PHY Transceiver Chip | Quake Technologies |
| QT2021 | 10 Gb/s Ethernet And Fibre Channel PHY Transceiver Chip | Quake Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |