DataSheet.es    


PDF SC454 Data sheet ( Hoja de datos )

Número de pieza SC454
Descripción Single-Phase Single Chip IMVP-6/6 Vcore Power Supply
Fabricantes Semtech Corporation 
Logotipo Semtech Corporation Logotipo



Hay una vista previa y un enlace de descarga de SC454 (archivo pdf) en la parte inferior de esta página.


Total 1 Páginas

No Preview Available ! SC454 Hoja de datos, Descripción, Manual

POWER MANAGEMENT
Description
The SC454 is a single-phase chip, high-performance PWM
controller designed to power advanced IMVP-6 and IMVP6+
™ processors. On-chip support is provided for all of the
IMVP-6/6+ requirements, including Active Voltage Position-
ing, Geyserville-3 VID transitions, VID-Controlled Deeper
Sleep voltage setting, PSI#, DPRSTP#, DPRSLP Control,
Fast and Slow C4 Exit, and default Boot Voltage.
www.DataTShheeeSt4CU4.c5om4 implements hysteretic control technology which
provides the fastest possible transient response while
avoiding the stability issues inherent to classical PWM
controllers. Eliminating the sense resistors reduces costs
and PCB area, plus increases system efciency. Integrated
SmartDriver™ technology initially turns on the high-side
driver with ‘soft’ drive to reduce ringing, EMI, and capaci-
tive turn-on of the low side MOSFET, while also increasing
overall efciency.
Hysteretic operation adaptively reduces the SC454 switch-
ing frequency at light loads. Combined with an automatic
“power-save” mode which prevents negative current ow in
the low-side FET, system efciency is signicantly enhanced
during light loading conditions.
A 7-bit DAC, accurate to 0.85%, sets the output voltage
reference, and implements the 0.300V to 1.500V range
required by the processor. The DAC slew rate is externally
programmed to minimize transient currents and audible
noise. True differential remote sensing provides accurate
point-of-load regulation at the processor die. Other features
include programmable soft-start, open-drain IMVP-6/6+
PWRGD and CLKEN# outputs, dynamic current sharing,
over-voltage and programmable over-current protection.
The SC454 is available in a space-saving 32-pin MLP
package.
SC454
Single-Phase Single Chip
IMVP-6/6+ Vcore Power Supply
Features
Single-Phase Solution with Integrated Drivers
Hysteretic Control for Fast Transient Response
VR_TT Support
Active Voltage Positioning
True Differential Remote (die) Sensing
On-Chip Support for all IMVP-6/6+ Power
Management Features
VID Programmed Deeper Sleep Voltage
Fast/Slow C4E Break Event Support
Clock Enable (CLKEN#) Output
Delayed Power Good Signal with Blanking
Programmable Soft-Start and DAC Slew Control
Programmable OCP Threshold
Supports all Ceramic Decoupling Solutions
32-pin MLP (5x5)
Latched Over-Voltage Protection
Applications
IMVP-6/6+ Notebook PCs
Embedded Applications
March 20, 2006
1 www.semtech.com

1 page





PáginasTotal 1 Páginas
PDF Descargar[ Datasheet SC454.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SC450Dual Phase Power Supply ControllerSemtech Corporation
Semtech Corporation
SC45012MHz Step-Up Switching RegulatorSemtech Corporation
Semtech Corporation
SC45022MHz Step-Up Switching RegulatorSemtech Corporation
Semtech Corporation
SC4502H2MHz Step-Up Switching RegulatorSemtech Corporation
Semtech Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar