DataSheet.es    


PDF UPD78064Y Data sheet ( Hoja de datos )

Número de pieza UPD78064Y
Descripción (UPD78xxx) 8-Bit Single-Chip Microcontroller
Fabricantes NEC 
Logotipo NEC Logotipo



Hay una vista previa y un enlace de descarga de UPD78064Y (archivo pdf) en la parte inferior de esta página.


Total 70 Páginas

No Preview Available ! UPD78064Y Hoja de datos, Descripción, Manual

User’s Manual
µ PD78064, 78064Y Subserieswww.DataSheet4U.com
8-Bit Single-Chip Microcontrollers
µ PD78062
µ PD78063
µ PD78064
µ PD78P064
µ PD78062Y
µ PD78063Y
µ PD78064Y
µ PD78P064Y
Document No. U10105EJ4V1UM00 (4th edition)
Date Published November 1999 N CP(K)
© 1993
Printed in Japan

1 page




UPD78064Y pdf
The application circuits and their parameters are for references only and are not intended for use in actual design-
in's.
Purchase of NEC I2C components conveys a license under the Philips I2C Patent Rights to use these
components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined
by Philips.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
www.DataSheet4U.comNEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated “quality assurance program“ for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
M7D 98.12
User’s Manual U10105EJ4V1UM00

5 Page





UPD78064Y arduino
Differences between µPD78064 and µPD78064Y subseries:
The µPD78064 and µPD78064Y subseries are different in the following functions
of the serial interface channel 0.
www.DataSheet4U.com
Modes of serial interface channel 0
3-wire serial I/O mode
2-wire serial I/O mode
SBI (serial bus interface) mode
I2C (Inter IC) bus mode
: Supported
— : Not supported
µPD78064
Subseries
µPD78064Y
Subseries
Legend
Data representation weight
Active low representations
Note
Caution
Remarks
Numeral representations
: High digits on the left and low digits on the right
: ××× (line over the pin and signal names)
: Description of note in the text.
: Information requiring particular attention
: Additional explanatory material
: Binary ... ×××× or ××××B
Decimal ... ××××
Hexadecimal ... ××××H
User’s Manual U10105EJ4V1UM00

11 Page







PáginasTotal 70 Páginas
PDF Descargar[ Datasheet UPD78064Y.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
UPD780648-BIT SINGLE-CHIP MICROCOMPUTERNEC
NEC
UPD78064(UPD78xxx) 8-Bit Single-Chip MicrocontrollerNEC
NEC
UPD78064Y(UPD78xxx) 8-Bit Single-Chip MicrocontrollerNEC
NEC
UPD78064Y(UPD78xxx) 8-Bit Single-Chip MicrocontrollerNEC
NEC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar