|
|
PDF TIP250 Data sheet ( Hoja de datos )
| Número de pieza | TIP250 | |
| Descripción | 8-Mbytes Flash Memory | |
| Fabricantes | TEWS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TIP250 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
The Embedded I/O Company
TIP250 8 Mbytes Flash Memory
Application Information
The TIP250 is an IndustryPack compatible module that
offers an easy and reliable way to implement 8 Mbytes of
Flash memory. The TIP250 is ideal for holding application
code, operating system software or data.
Two AM29LV033 devices (32Mbit, x8 organized) are used
to provide 1 bank of 8 Mbytes (16 bit wide) Flash memory
which is divided into 64 sectors of 128 Kbytes (16 bit wide).
www.DataShAecect4eUs.sceosmto the TIP250 Flash memory occur within the IP
memory space. After power-on the TIP250 comes up in
read only mode. The IP I/O space holds the Flash Control
Register and the interrupt vector register.
ID-PROM
Local
Control
Logic
Local +3.3V
32 Mbit FLASH
(4Mbyte)
32 Mbit FLASH
(4Mbyte)
Bank1
8 Mbytes FLASH
64 sectors of 128Kbytes
16 bit wide
For First-Time-Buyers the engineering documentation
TIP250-ED is recommended. The engineering
documentation includes TIP250-DOC, schematics and data
sheets.
Driver support (TIP250-SW-xx) is available for different
operating systems.
Technical Information
! Interface according to IndustryPack specification
! Identification-PROM supports auto-configuration
! Single Size IndustryPack
! 8 Mbytes of Flash Memory
! Organized in 1 bank of 8 Mbytes (16 bit wide), 64
sectors of 128 Kbytes (16 bit wide)
! Flash chip: 2 x AM29LV033, 90 ns, TSOP package
! Guaranteed min. erase and program cycle endurance:
1.000.000 cycles
! Typical bank erase time: 45 s
! Typical sector erase time: 0.7 s
! Typical word programming time: 9 µs
! Typical bank programming time: 36 s
! Interrupt support on program / erase cycles
! Power requirements: +5V only, on board +3.3V
generation
! No connections to IP-I/O connector
! Operating temperature -40°C to +85°C
Order Information
TIP250-10
TIP250-DOC
TIP250-ED
TIP250-SW-12
TIP250-SW-32
TIP250-SW-42
TIP250-SW-62
TIP250-SW-72
TIP250-SW-82
TIP250-SW-92
TIP250-SW-95
8 Mbytes Flash Memory
User Documentation
Engineering Documentation, includes
TIP250-DOC
OS-9 Software Support
pSOS Software Support
VxWorks Software Support
Windows NT 4.0 Software Support
LynxOS Software Support
LiNUX Software Support
QNX 4 Software Support
QNX 6 Software Support
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice
IndustryPack is a registered trademark of SBS Technologies, Inc.
TEWS TECHNOLOGIES GmbH
Am Bahnhof 7
Phone: +49-(0)4101-4058-0
e-mail: [email protected]
25469 Halstenbek / Germany
Fax: +49-(0)4101-4058-19
www.tews.com
TEWS TECHNOLOGIES LLC
1 E. Liberty Street, Sixth Floor
Phone: +1 (775) 686 6077
e-mail: [email protected]
06/2002
Reno, Nevada 89504 / USA
Fax: +1 (775) 686 6024
www.tews.com
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet TIP250.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TIP250 | 8-Mbytes Flash Memory | TEWS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |