|
|
Número de pieza | 10-522958 | |
Descripción | industrial products composite coupling nut | |
Fabricantes | Amphenol Industrial | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 10-522958 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Amphenol ® Heavy Duty
Cylindrical Connectors
12-052-9
www.DataSheet4U.com
Amphenol
1 page Amphenol® Heavy Duty
Cylindrical Connectors
MIL-C-22992/Proprietary
• High Current Capacity
• Rugged Construction
• Safety
• Serviceability
Amphenol meets the demands for heavy duty connectors by
providing three cylindrical connector series, each with unique
design characteristics for reliable operation in specific indus-
trial environments.
Class “L” – for the heaviest electrical loads (Pages 2 – 19)
• Current range from 40 to 200 amperes
• Direct current or single/three phase, 60/400 Hertz alternat-
www.Data•ShiAneugetoct4muUrare.tcincotgmrounding for safety
• MIL-C-22992 qualification
QWLD – for most power and control circuits (Pages 21 – 77)
• Military (MIL-C-22992) qualified connectors and industrial
equivalents available
• Increased shell size for greater durability than similar stan-
dard connectors
QWL – a more compact heavy duty design for industrial power and control applications
(Page 78, references Amphenol Catalog 12-053)
These three series share the following common characteristics which are critical to reliable heavy
duty connectors:
• Resistance to the operating environment. Refer to environmental data, below.
• Double stub coupling threads for faster connections; no cross threading, easy cleaning.
• Left hand accessory threads to minimize cable twisting, wire breakage, accidental connector
disassembly.
• Gaskets or O-rings at appropriate surfaces for perfect weathertight connections.
Amphenol® heavy duty connectors have been exposed to the following environmental conditions,
without compromise of mechanical integrity or degradation of electrical performance.
Condition
Thermal Shock
Moisture Resistance
(Cable mounted connectors)
Durability
Salt Spray
(Corrosion)
Vibration
High Impact
Heat Rise (Class L only)
Fluid Immersion
Water Immersion
Configuration
Unmated
Mated
Mated
Unmated
Mated
Mated
Mated
Unmated
Mated and
Unmated
Description
Five complete one hour temperature cycles of
–55°C to +125°C
Ten complete 24 hour cycles of +25°C to
+65°C temperature at 90% to 98% humidity
500 complete mating/unmating cycles
48 hour exposure to atomized 5%
saline solution at +35°C
10 to 55 Hz, .06 inch total excursion
in 1 minute cycles for 6 hours, 55 to
2000 Hz, 10G peak amplitude sweep
Nine hammer blows from 1, 3 and 5 feet,
three each in three axes on mounting panel
Maximum rated DC current for four
hours at +25°C in still air
20 hours immersion in hydraulic
fluid and lubricating oil
4 hours immersion at 1 atmosphere
pressure differential
Reference
MIL-STD-1344, method
1003, test condition A
MIL-STD-202, method 106
MIL-C-22992
MIL-STD-1344,
method 1001
MIL-STD-1344,
method 2005
MIL-STD-202,
method 207
MIL-C-22992
MIL-C-22992
MIL-C-22992
1
5 Page MIL-C-22992, Class L
alternate insert rotations
To avoid cross-plugging problems in applications requiring
the use of more than one connector of the same size and
arrangement, alternate insert rotations are available as
indicated in the accompanying chart.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counterclockwise the same number of degrees in
respect to the normal shell key.
www.DataSheet4U.com
Position W
Position X
Position Y
Position Z
Views looking into front face of pin insert or rear of socket insert.
Insert
Arrangements
28-12
28-13
32-04
32-05
32-12
32-13
44-12
44-13
44-50
44-51
44-52
44-56
52-12
52-13
Keying Position
(degrees from normal position)
DC or 60 Hz
Normal
W
400 Hz
XY
0 – – 180
0 – – 180
0 – 90 –
0 – 90 –
0 – – 180
0 – – 180
0 –––
0 –––
0 –––
0 –––
0 –––
0 –––
0
300 –
–
0
300 –
–
Z
–
–
–
–
–
–
60
60
–
–
–
–
–
–
7
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet 10-522958.PDF ] |
Número de pieza | Descripción | Fabricantes |
10-522958 | industrial products composite coupling nut | Amphenol Industrial |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |