DataSheet.es    


PDF NHSW046T Data sheet ( Hoja de datos )

Número de pieza NHSW046T
Descripción AMBER LED
Fabricantes NICHIA CORPORATION 
Logotipo NICHIA CORPORATION Logotipo



Hay una vista previa y un enlace de descarga de NHSW046T (archivo pdf) en la parte inferior de esta página.


Total 13 Páginas

No Preview Available ! NHSW046T Hoja de datos, Descripción, Manual

No. STSE-CC5024A
<Cat.No.050307>
www.DataSheet4U.com
SPECIFICATIONS FOR NICHIA CHIP TYPE WHITE LED
MODEL : NHSW046T
NICHIA CORPORATION
-0-

1 page




NHSW046T pdf
7.CAUTIONS
Nichia STSE-CC5024A
<Cat.No.050307>
The LEDs are devices which are materialized by combining Blue LEDs and special phosphors.
Consequently, the color of the LEDs is changed a little by an operating current.
Care should be taken after due consideration when using LEDs.
(1) Moisture Proof Package
· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.
There is a possibility that this can cause exfoliation of the contacts and damage to the optical
www.DataSheect4hUa.rcaomcteristics of the LEDs. For this reason, the moisture proof package is used to keep moisture
to a minimum in the package.
· The moisture proof package is made of an aluminum moisture proof bag with a zipper. A package of
a moisture absorbent material (silica gel) is inserted into the aluminum moisture proof bag.
The silica gel changes its color from blue to pink as it absorbs moisture.
(2) Storage
· Storage Conditions
Before opening the package :
The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within a
year. When storing the LEDs, moisture proof packaging with absorbent material (silica gel)
is recommended.
After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered
within 168 hours (7days) after opening the package. If unused LEDs remain, they should be
stored in moisture proof packages, such as sealed containers with packages of moisture absorbent
material (silica gel). It is also recommended to return the LEDs to the original moisture proof bag
and to reseal the moisture proof bag again.
· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following conditions.
Baking treatment : more than 24 hours at 65 ± 5°C
· Nichia LED electrode sections are comprised of a silver plated copper alloy. The silver surface may be
affected by environments which contain corrosive gases and so on. Please avoid conditions which
may cause the LED to corrode, tarnish or discolor. This corrosion or discoloration may cause difficulty
during soldering operations. It is recommended that the User use the LEDs as soon as possible.
· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
condensation can occur.
(3) Heat Generation
· Thermal design of the end product is of paramount importance. Please consider the heat generation
of the LED when making the system design. The coefficient of temperature increase per input
electric power is affected by the thermal resistance of the circuit board and density of LED placement
on the board, as well as other components. It is necessary to avoid intense heat generation and operate
within the maximum ratings given in this specification.
· The operating current should be decided after considering the ambient maximum temperature of LEDs.
-4-

5 Page





NHSW046T arduino
1.4
(1.15)
Anode
Internal Circuit
A
Cathode mark (C 0.25)
Cathode
Protection device
K
0.9
ITEM
PACKAGE
ENCAPSULATING RESIN
ELECTRODES
MATERIALS
Heat-Resistant Polymer
Epoxy Resin (with Diffused + Phosphor)
Ag Plating Copper Alloy
½ NHSW046 has a protection device built in as a protection
circuit against static electricity.
Model
NHSW046
Unit
mm
NICHIA CORPORATION Title
No.
OUTLINE DIMENSIONS 15/1
Scale
050208537021
Allow
±0.1

11 Page







PáginasTotal 13 Páginas
PDF Descargar[ Datasheet NHSW046T.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
NHSW046ATAMBER LEDNICHIA CORPORATION
NICHIA CORPORATION
NHSW046ATWHITE LEDNICHIA CORPORATION
NICHIA CORPORATION
NHSW046HTAMBER LEDNICHIA CORPORATION
NICHIA CORPORATION
NHSW046TAMBER LEDNICHIA CORPORATION
NICHIA CORPORATION

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar