|
|
PDF NHSA505DT Data sheet ( Hoja de datos )
| Número de pieza | NHSA505DT | |
| Descripción | AMBER LED | |
| Fabricantes | NICHIA CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NHSA505DT (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Nichia STS-DA1-0071
<Cat.No.071226>
www.DataSheet4U.com
SPECIFICATIONS FOR NICHIA CHIP TYPE AMBER LED
MODEL : NHSA505DT
NICHIA CORPORATION
1 page  
7.CAUTIONS
Nichia STS-DA1-0071
<Cat.No.071226>
The LEDs are devices which are materialized by combining Blue LEDs and special phosphors.
Consequently, the color of the LEDs is changed a little by an operating current.
Care should be taken after due consideration when using LEDs.
(1) Moisture Proof Package
· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.
There is a possibility that this can cause exfoliation of the contacts and damage to the optical
characteristics of the LEDs. For this reason, the moisture proof package is used to keep moisture
www.DataSheetto4Ua.cmominimum in the package.
· The moisture proof package is made of an aluminum moisture proof bag. A package of
a moisture absorbent material (silica gel) is inserted into the aluminum moisture proof bag.
The silica gel changes its color from blue to pink as it absorbs moisture.
(2) Storage
· Storage Conditions
Before opening the package :
The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within a
year. When storing the LEDs, moisture proof packaging with absorbent material (silica gel)
is recommended.
After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered
within 168 hours (7days) after opening the package. If unused LEDs remain, they should be
stored in moisture proof packages, such as sealed containers with packages of moisture absorbent
material (silica gel). It is also recommended to return the LEDs to the original moisture proof bag
and to reseal the moisture proof bag again.
· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following conditions.
Baking treatment : more than 24 hours at 65 ± 5°C
· This product has silver plated metal parts that are inside and/or outside the package body. The silver
plating becomes tarnished when being exposed to an environment which contains corrosive gases.
Any LED with tarnished leads may lead to poor solderability and deterioration of optical characteristics.
Please do not expose the LEDs to corrosive atmosphere during storage.
· After assembly and during use, silver plating can be affected by the corrosive gases emitted by
components and materials in close proximity of the LEDs within an end product, and the gases entering
into the product from the external atmosphere. The above should be taken into consideration when
designing.
· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
condensation can occur.
-4-
5 Page 
Forward Current vs.
Chromaticity Coordinate
0.440
0.435
Ta=25°C
0.430
0.425
10mA
30mA 1mA
0.420
0.555 0.560 0.565 0.570 0.575
x
Ambient Temperature vs.
Chromaticity Coordinate
0.440
0.435
0.430
0.425
IFP=10mA
-40°C
0°C
25°C
50°C
110°C
0.420
0.555 0.560 0.565 0.570 0.575
x
Spectrum
1.2
1.0
Ta=25°C
IF=10mA
0.8
0.6
0.4
0.2
0
400 500 600 700
Wavelength λ (nm)
Directivity
800
Y
1.0
Ta=25°C
IFP=10mA
X-X
Y-Y
0.5
0° 10° 20°
X
30°
40°
Y
50°
X
60°
70°
80°
0 90°
90° 60° 30°
0°
0.5
1.0
Radiation Angle
Model
NHSA505D
NICHIA CORPORATION Title CHARACTERISTICS
No. 071220706951
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet NHSA505DT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NHSA505DT | AMBER LED | NICHIA CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |