DataSheet.es    


PDF TD-36485 Data sheet ( Hoja de datos )

Número de pieza TD-36485
Descripción Telephone Model
Fabricantes Westermo 
Logotipo Westermo Logotipo



Hay una vista previa y un enlace de descarga de TD-36485 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! TD-36485 Hoja de datos, Descripción, Manual

User Guide
6618-2202
www.DataSheet4U.com
TD-36
TD-36
DIN-rail Tele and Leased Line modem
TD-36 485
DIN-rail Tele and Leased Line modem
with I/O and RS-485
www.westermo.com

1 page




TD-36485 pdf
Agency approvals and standards compliance
Type
EMC
www.DataSheet4U.com
Safety
PSTN
Approval / Compliance
EN 61000-6-2, Immunity industrial environm
EN 55024, Immunity IT equipment
EN 61000-6-3, Emission residential environments
FCC part 15 Class B
EN 50121-4, Railway signalling and telecommunications apparatus
IEC 62236-4, Railway signalling and telecommunications apparatus
EN 60950-1 and UL 60950-1, IT equipment
CS 03 Part 1, issue 9
FCC part 68,TIA-968-A
ETSI TS103 021-1, ETSI TS103 021-2, ETSI TS103 021-3
AS/ACIF S002, AS/ACIF S006
According to:
TIA-968-A and CS-03 Part 1, issue 9
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the left side of this equipment is a label that contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
Caution-to reduce the risk of fire, use only No.26 AWG or lager telecommunication cable.
The USOC jack required RJ11-C, and the REN is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be connected to a
line, as determined by the total RENs, contact the local telephone company. For products approved
after July 23, 2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment TD-36/485 causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if advance
notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service.
6618-2202
5

5 Page





TD-36485 arduino
Digital Output
The digital output gives the following functionality:
1. Output Contact
The modem has a change over relay output (SPDT-contact).This output can be
controlled by a remote modem through Transparent I/O and Output service in the
Generic I/O function.The output can also be programmed to follow the local DCD
or DTR signals.
2. Remotely controlled
www.DataSheet4U.cTomhe output can be programmed to follow a remote modem data input. A remote unit
can also set/reset the output as well as transferring a sequence of “set- and resets” of
the output.
3. Follow DCD/Network
The output can be programmable to follow the local DCD or DTR signal.
Digital Input
The digital input gives the following functionality:
1. Static input
A static digital level trigged input high or low triggers the Generic I/O.With a level
trigged input only the first entry in the Generic I/O list can be trigged by the I/O input.
The input is trigged when the selected level has been stable for ta ms. A new trig will not
occur until the input has return to the opposite state an back again.
High level trigged input timing
ta ta ta
Trig
Low level trigged input timing
ta ta
<ta
Trig
Trig No trig due to low
level shorter than ta
6618-2202
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet TD-36485.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TD-36485Telephone ModelWestermo
Westermo

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar