DataSheet.es    


PDF SA-AK240 Data sheet ( Hoja de datos )

Número de pieza SA-AK240
Descripción (SA-AK240 / SA-AK340) CD Stereo System
Fabricantes Panasonic 
Logotipo Panasonic Logotipo



Hay una vista previa y un enlace de descarga de SA-AK240 (archivo pdf) en la parte inferior de esta página.


Total 28 Páginas

No Preview Available ! SA-AK240 Hoja de datos, Descripción, Manual

Operating Instructions
CD Stereo System
For U.S.A.
The illustrations show SC-AK340.
As an ENERGY STAR® Partner, Panasonic has determined
that this product meets the ENERGY STAR® guidelines for
energy efficiency.
www.DataSheet4U.com
Model No. SC-AK340
SC-AK240
Table of contents
Listening caution.....................................2
IMPORTANT SAFETY INSTRUCTIONS ..3
Getting started .........................................4
Placement of speakers............................5
Overview of controls ...............................6
Discs .........................................................7
Cassette tape – Play and record ..........10
Radio.......................................................12
Timer .......................................................13
Sound adjustment .................................14
External unit...........................................15
Product Service .....................................15
Maintenance...........................................15
When moving the unit ...........................15
Troubleshooting guide..........................16
Specifications ........................................17
Limited Warranty
(ONLY FOR U.S.A.) ............................18
Limited Warranty
(ONLY FOR CANADA) .......................19
Español
Preparativos iniciales............................20
Colocación de los altavoces ................21
Controles................................................22
Discos.....................................................23
Cintas de casete –
reproducción y grabación ................24
Radio.......................................................25
Temporizador .........................................26
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
SUPPLIED ACCESSORIES
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (As of October 2005)
In the U.S.A. to order accessories, refer to “Accessory
Purchases” on page 18.
1 x AC power supply cord 2 x Remote control batteries
(K2CB2CB00018)
1 x FM indoor antenna
1 x AM loop antenna
(RSA0006-L)
(N1DAAAA00001)
1 x Remote Control
AK340
• Silver (N2QAHB000065)
For U.S.A. only
• Black (N2QAYB000028)
AK240
• Silver (N2QAHB000065)
Operations in these instructions are described mainly using
remote control, but you can do the operations on the main
unit if the controls are the same.
Unless otherwise indicated, illustrations in the operating
instructions are of SC-AK340 for the U.S.A.
Your unit may not look exactly the same as illustrated.
La guía rápida en español se encuentra en la página 20 -
27.
P PC
RQTV0061-3P

1 page




SA-AK240 pdf
Step 2 - Inserting batteries into the remote control
AA/R6/LR6
www.DataSheet4U.com
Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of time.
Store in a cool, dark place.
• Replace if the unit does not respond to the remote control even when held
close to the front panel.
• Do not use rechargeable type batteries.
• Mishandling of batteries in the remote control can cause electrolyte leakage,
which may cause a fire.
• If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of
your body.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
• put heavy objects on the remote control.
• spill liquids onto the remote control.
Use
Aim at the remote control sensor, avoiding obstacles, at a maximum range
of 7 m (23 feet) directly in front of the unit.
Refer to page 6 for the remote control sensor position.
Step 3 - DEMO function
When the unit is first plugged in, a demonstration of its functions may be shown
on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [DISPLAY, –DEMO].
The display changes each time the button is held down.
NO DEMO (off) Ô DEMO ON (on)
While in standby mode, select “NO DEMO” to reduce power consumption.
Note:
DEMO function cannot be turned on when DIMMER is on.
Placement of speakers
AK340
Place the front speakers so that the tweeter is on the
inside.
Tweeter
AK240
Speakers are designed identically so that no left or right
channel orientation is necessary.
You cannot take the front net off the speakers.
Use only the supplied speakers.
The combination of the main unit and speakers provide the best
sound. Using other speakers can damage the unit and sound
quality will be negatively affected.
Note:
• Keep your speakers at least 10mm (13/32˝) away from the system for
proper ventilation.
• These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily influenced
by magnetism.
• You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
• Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
Caution
• Use the speakers only with the
recommended system. Failure to do so can
damage the amplifier and speakers, and
can cause fire. Consult a qualified service
person if damage occurs or if a sudden
change in performance is apparent.
• Do not attach these speakers to walls or
ceilings.
5
RQT8043

5 Page





SA-AK240 arduino
Cassette tape – Play and record (Continued)
2 Press [0 OPEN] for DECK 1 or [OPEN 0] for DECK 2
and insert the cassette.
Insert with the side to be played facing towards you
and the exposed tape facing down. Close the holder by
hand.
Front
side
By remote control only
record
1) Press [DISC] and then [1] ~ [5] to select
specific
the disc.
discs/tracks
Ensure disc is stopped.
2) Press [PLAY MODE] to select the desired
mode (\ page 7).
3)
For 1-ALBUM mode and 1-SONG mode:
Press [ALBUM ( or )] to select the
album.
3 Press [3, TAPE] to start play.
To
stop tape playback
fast-forward and
rewind
www.DatasSelhecetebte4tUwe.ceonm
loaded decks
Action
Press [ 7, STOP].
Press [4 / REW / ] or [ / FF / ¢].
Press [DECK 1/2] (remote control :
[PLAY MODE]).
Note:
• Tape playback is momentarily interrupted if you open the other
deck.
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind up the leader tape so recording can begin
immediately.
1
Press [OPEN 0] for DECK 2 and insert the cassette
to be recorded.
Insert with the side to be recorded facing towards you
and the exposed tape facing down.
2
Select the source to be recorded.
Radio recording:
Tune in the station. (\ page 12)
Disc recording:
Insert the disc(s) you want to record.
Press [6, CD] and then [7, STOP].
Prepare the desired disc recording mode.
To
record
programmed
tracks
Action
Perform steps 2 to 4 in “Program play”
(\ page 8).
For 1-SONG mode:
Press [4, REW / ] or [¢, / FF] to
select the track.
Tape-to-tape recording:
Press [3, TAPE] and then [7, STOP].
Press [0 OPEN] for DECK 1 and insert the cassette
to record.
3 Press [, REC] to start recording.
Other basic operations
To Action
stop recording
Press [ 7, STOP].
record on the other Turn the cassette over and press [, REC].
side of the tape
erase a recorded
sound
1) Press [3, TAPE] and then [ 7, STOP].
2) Insert the recorded cassette into
DECK 2. Ensure there is no cassette in
DECK 1.
3) Press [, REC].
Note:
• Changes to volume and sound adjustments quality do not affect
recording.
• You cannot open DECK 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side B Tab for side A
To re-record
Normal cassette
Perform steps 3 to 6 in “Program play”
(\ page 8).
Adhesive tape
11
RQT8043

11 Page







PáginasTotal 28 Páginas
PDF Descargar[ Datasheet SA-AK240.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SA-AK240(SA-AK240 / SA-AK340) CD Stereo SystemPanasonic
Panasonic

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


www.DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar