DataSheet.es    


PDF 48M033 Data sheet ( Hoja de datos )

Número de pieza 48M033
Descripción TA48M033F
Fabricantes Toshiba Semiconductor 
Logotipo Toshiba Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de 48M033 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! 48M033 Hoja de datos, Descripción, Manual

TA48M025,03,033,0345,04,05F
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA48M025F,TA48M03F,TA48M033F
TA48M0345F,TA48M04F,TA48M05F
2.5 V, 3 V, 3.3 V, 3.45 V, 4 V, 5 V
Three-Terminal Low Dropout Voltage Regulator
The TA48M**F series consists of fixed-positive-output, low
dropout regulators with an output current of 500 mA (max). In
response to the need for low voltage devices, the series offers
devices with low output voltages of 2.5 V, 3.3 V etc.
Features
Maximum output current of 0.5 A
Low standby current: 800 μA (typ.)
Low dropout voltage: 0.65 V (max) @IOUT = 0.5 A
Protection function:
overcurrent/overheat/overvoltage/reversed power supply
connections.
New PW-Mold package (Surface-mount type)
Pin Assignment
HSOP3-P-2.30D
Weight
HSOP3-P-2.30D: 0.36 g ( typ.)
Marking side
132
IN GND OUT
Marking
3
48M**F
12
Note 1: A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Product No.(or abbreviation code) Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Lot No.
Note 1
Please contact your TOSHIBA sales representative for details as to
environmental matters such as the RoHS compatibility of Product. The
RoHS is the Directive 2002/95/EC of the European Parliament and of the
Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Note 2: The “**” part of each product number varies according to the output voltage of the product.
The product(s) in this document (“Product”) contain functions intended to protect the Product from
temporary small overloads such as minor short-term overcurrent, overvoltage, or overheating. The
protective functions do not necessarily protect Product under all circumstances. When incorporating
Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2)
to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence.
For details, please refer to the notes appearing below in this document and other documents referenced
in this document.
1 2008-12-12

1 page




48M033 pdf
TA48M025,03,033,0345,04,05F
TA48M04F
Electrical Characteristics
(unless otherwise specified, VIN = 6 V, IOUT = 250 mA, Tj = 25°C, CIN = 0.1 μF, COUT = 10 μF)
Characteristics
Symbol
Test
Circuit
Test Condition
Min Typ. Max Unit
⎯ ⎯ 3.84 4.0 4.16
Output voltage
Line regulation
Load regulation
Quiescent current
Output noise voltage
Ripple rejection
Dropout voltage
Peak circuit current
Short circuit current
VOUT
Reg·line
Reg·load
IB
VNO
R.R.
VD
IPEAK
ISC
5 V VIN 16 V,
5 mA IOUT 500 mA,
0°C Tj 125°C
5 V VIN 16 V
5 mA IOUT 500 mA
5 V VIN 16 V,
IOUT = 0 mA
5 V VIN 16 V,
IOUT = 250 mA
10 Hz f 100 kHz,
IOUT = 50 mA
f = 120 Hz, 5 V VIN 16 V,
IOUT = 50 mA
IOUT = 250 mA
IOUT = 500 mA
⎯⎯
⎯⎯
3.8 4.0 4.2
V
11 28 mV
45 115 mV
0.9 1.4
mA
13 25
110 ⎯ μVrms
58 68
0.17 0.35
0.35 0.65
0.60 1.25 1.50
0.60 1.25 1.50
dB
V
A
A
TA48M05F
Electrical Characteristics
(unless otherwise specified, VIN = 7 V, IOUT = 250 mA, Tj = 25°C, CIN = 0.1 μF, COUT = 10 μF)
Characteristics
Symbol
Test
Circuit
Test Condition
Min Typ. Max Unit
⎯ ⎯ 4.8 5.0 5.2
Output voltage
Line regulation
Load regulation
Quiescent current
Output noise voltage
Ripple rejection
Dropout voltage
Peak circuit current
Short circuit current
VOUT
Reg·line
Reg·load
IB
VNO
R.R.
VD
IPEAK
ISC
6 V VIN 18 V,
5 mA IOUT 500 mA,
0°C Tj 125°C
6 V VIN 18 V
5 mA IOUT 500 mA
6 V VIN 18 V,
IOUT = 0 mA
6 V VIN 18 V,
IOUT = 250 mA
10 Hz f 100 kHz,
IOUT = 50 mA
f = 120 Hz, 6 V VIN 18 V,
IOUT = 50 mA
IOUT = 250 mA
IOUT = 500 mA
⎯⎯
⎯⎯
4.75 5.0 5.25
V
15 35 mV
50 135 mV
1.0 1.4
mA
13 25
125 ⎯ μVrms
58 68
0.17 0.35
0.35 0.65
0.60 1.30 1.55
0.60 1.30 1.55
dB
V
A
A
5 2008-12-12

5 Page





48M033 arduino
TA48M025,03,033,0345,04,05F
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also
refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the
specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public
impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the
aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign
Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software
or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
11 2008-12-12

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet 48M033.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
48M033TA48M033FToshiba Semiconductor
Toshiba Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar