|
|
Número de pieza | RA8803 | |
Descripción | (RA8803 / RA8822) Two Layers Text/Graphic LCD Controller Specification | |
Fabricantes | RAIO Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RA8803 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! www.DataSheet4U.com
RAiO
RA8803/8822
Two Layers Text/Graphic
LCD Controller
Specification
Version 2.1
August 4, 2005
RAiO Technology Inc.
©Copyright RAiO Technology Inc. 2004, 2005
RAiO TECHNOLOGY INC.
1/8
www.raio.com.tw
1 page Version 2.1
RS
www.DataSheet4U.com
CS1#
CS2
INT
BUSY
RA8803/8822
Two Layers Character/Graphical LCD Controller
control. Active high for read and active low for write.
Register/Memory Select
The MPU will access Register when RS is Low and access Data Memory
I
when RS is High.
Usually connect to MPU address bus A0.
Chip Select
I
The RA8803/8822 is active when CS1# is low and CS2 is high
Interrupt Signal
O This is an interrupt output to indicate the status of RA8803/88822. It could
be setup active high or low.
Busy Signal
This is a busy output to indicate the RA8803/88822 is in busy state. It
could be setup active high or low. If setup active high, the RA8803/8822
O
can’t be access when BUSY pin is high.
It’s should be connected to MPU I/O input. The MPU have to poll this pin
before accessing RA8803/8822.
4.2 LCD Driver Interface
Pin Name
YD
I/O
O
FRM
O
LP
XCK
DISPOFF
O
O
O
LD[7..0]
O
Description
Start Signal of LCD Per Frame
YD is the frame start signal.
Control Signal of LCD AC Wave
This signal controlt the Level Shift of LCD driver. Normally inputs a frame
inversion signal.
LCD Common Latch
This is a latch signal for LCD driver to latch the Common data.
LCD Clock
This is a shift clock signal for LCD driver.
LCD Display OFF
This signal is used to control the LCD Display ON or OFF.
LCD Driver Data Bus
When 8-bit LCD driver IC is used. LD[7..0] are connected to LCD driver
data bus. When 4-bit CPU is used, LD[3..0] are connected to LCD driver
data bus, but LD[7..4] are non-connected.
4.3 Clock Interface
Pin Name
LPF
I/O Description
Low Pass Filter Input
I
This is a low pass filter input. Please refer the circuit of application note.
RAiO TECHNOLOGY INC.
5/8
www.raio.com.tw
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet RA8803.PDF ] |
Número de pieza | Descripción | Fabricantes |
RA8802 | (RA8802 / RA8820) Character/Graphic LCD-Controller Specification | RAIO Technology |
RA8803 | (RA8803 / RA8822) Two Layers Text/Graphic LCD Controller Specification | RAIO Technology |
RA8806 | Two Layers Character/Graphic LCD Controller Specification | RAIO Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |