|
|
PDF XC-EU50 Data sheet ( Hoja de datos )
| Número de pieza | XC-EU50 | |
| Descripción | CCD Video Camera Module | |
| Fabricantes | Sony | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XC-EU50 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
A-AVM-100-12 (1)
www.DataSheet4U.com
CCD Black-and-White
Video Camera Module
Technical Manual
XC-EU50/EU50CE
2001 Sony Corporation
1 page  
Location of Parts and Operation
Front/Top/Bottom
1 Lens mount (C-mount)
2 Reference holes
Overview
www.DataSheet4U.com
3 Reference holes/Tripod screw holes
1 Lens mount (C-mount)
Attach the VCL-50Y-M C-mount lens or other optical
equipment.
Note
The lens must not project more than 7 mm (9/32 inch)
from the lens mount.
2 Reference holes (Top)
These precision screw holes are for locking the camera
module. Locking the camera module into these holes
secures the optical axis alignment.
3 Reference holes/Tripod screw holes (bottom)
These precision screw holes are for locking the camera
module. Locking the camera module using these holes
secures the optical axis alignment.
You can install the camera on a tripod. To install on a
tripod, you will need to install the VCT-333I tripod
adaptor using the reference holes on the bottom of the
camera.
5
5 Page 
Restart/Reset
To set Restart/Reset mode
The information on one screen can be extracted at any
time by externally inputting a restart/reset signal (HD/
VD). To enter this mode, set DIP switches 6, 7, and 8
on the rear panel of the camera as shown in the figure
below. The setting is especially effective for the
operation explained below.
www.DataSheet4U.com
Mode Setting
Long exposure
The Restart/Reset function extends the CCD
accumulation time, resulting in a highly sensitive
image. This function is effective when you cannot gain
satisfactory sensitivity under normal operating
conditions, or when you want to observe a moving
object. Extend the VD interval (T) period between
external VD pulses.
Note
Some white spots may appear after a long exposure.
Sample input timing chart 1
EXT HD Continuous signal: 15.734 kHz (XC-EU50) Allowable frequency value ±1%,
15.625 kHz (XC-EU50CE) Allowable frequency value ±1%
EXT VD VD interval (T): 262.5 H or more (XC-EU50) and less than 1 second (Recommended),
312.5 H or more (XC-EU50CE) and less than 1 second (Recommended)
Four or more VD pulses are required.
T TT
Exposure time for the Odd field
Exposure time for the Even field
Frame Accumulation (Factory setting)
Video output
Invalid image
Odd image
Even image
Valid frame image
Odd and even fields are determined by the phase of the EXT HD/VD signal input from the outside.
11
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet XC-EU50.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XC-EU50 | CCD Video Camera Module | Sony |
| XC-EU50CE | CCD Video Camera Module | Sony |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |