DataSheet.es    


PDF OP755D Data sheet ( Hoja de datos )

Número de pieza OP755D
Descripción NPN Photo transistor
Fabricantes OPTEK Technologies 
Logotipo OPTEK Technologies Logotipo



Hay una vista previa y un enlace de descarga de OP755D (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! OP755D Hoja de datos, Descripción, Manual

www.DataSheet4U.com
Product Bulletin OP755
June 1999
NPN Phototransistor with Base-Emitter Resistor
Types OP755A, OP755B, OP755C, OP755D
Features
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Wide receiving angle
Variety of sensitivity ranges
Side-looking package for space limited
applications
Base-emitter resistor provides ambient
light protection
Description
The OP755 device consists of a NPN
silicon phototransistor molded in blue
tinted epoxy packages. The wide
receiving angle provides relatively even
reception over a large area. The side-
looking package is designed for easy PC
board mounting of slotted optical
switches or optical interrupt detectors.
The series is mechanically and spectrally
matched to the OP140 and OP240 series
of infrared emitting diodes.
Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter Reverse Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . -40C to +100C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C(1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW(2)
Ò±¬»-æ
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. When flow soldering.
Max. 20 grams force may be applied to leads when soldering.
(2) Derate linearly 2.0 mW/C above 25C.
(3) Light source is an unfiltered GaAs LED with a peak emission wavelength of 935 nm and a
radiometric intensity level which varies less than 10% over the entire lens surface of the
phototransistor being tested.
(4) The knee point irradiance is defined as the irradiance required to increase IC(ON) to 50 A.
Typical Performance Curves
̧°·½¿´ Í°»½¬®¿´ λ-°±²-»
Schematic
The phototransistor has an internal base-
emitter resistor which provides protection
from low level ambient lighting
conditions. This feature is also useful
when the media being detected is semi-
transparent to infrared light in interruptive
applications.
Optek Technology, Inc.
1215 W. Crosby Road
É¿ª»´»²¹¬¸ ó ²³
Carrollton, Texas 75006
9
(972) 323-2200
Fax (972) 323-2396

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet OP755D.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
OP755ANPN Photo transistorOPTEK Technologies
OPTEK Technologies
OP755BNPN Photo transistorOPTEK Technologies
OPTEK Technologies
OP755CNPN Photo transistorOPTEK Technologies
OPTEK Technologies
OP755DNPN Photo transistorOPTEK Technologies
OPTEK Technologies

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar