DataSheet.es    


PDF R46KNxxxxxx Data sheet ( Hoja de datos )

Número de pieza R46KNxxxxxx
Descripción Metallized Polypropylene Film Capacitor
Fabricantes Kemet Electronics 
Logotipo Kemet Electronics Logotipo



Hay una vista previa y un enlace de descarga de R46KNxxxxxx (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! R46KNxxxxxx Hoja de datos, Descripción, Manual

www.DataSheet4U.com
Loose
Taped
Fig.1 Fig.2
R.46
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
Insulated rigid leads Insulated flexible leads 0.5mm2
Note: R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Ø d ±0.05
p 15
0.6 or 0.8*
*See size table.
All dimensions are in mm.
22.5 p 27.5
0.8
p = 37.5
1
Pitch
(mm)
10.0
15.0
15.0
22.5
27.5
37.5
Box thickness (B)
(mm)
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.2
H +0.1
L +0.2
B +0.2
H +0.1
L +0.3
B +0.2
H +0.1
L +0.5
B +0.2
H +0.1
L +0.3
B +0.2
H +0.1
L +0.3
B +0.3
H +0.1
L +0.3
GENERAL TECHNICAL DATA
test method and performance
Dielectric: polypropylene film.
Damp heat, steady state:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
electrical characteristics
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Capacitance range:
0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C:
* Typical value
10 (6)* at 1kHz
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
1x105 M(5x105 M)*
30000 s (150000 s )*
* Typical value
+25°C±5°C
1 min
100 Vdc
for C0.33µF
for C>0.33µF
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
05/2007
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
Winding scheme
158
single sided metallized
polypropylene film

1 page




R46KNxxxxxx pdf
www.DataSheet4U.com
Loose
Taped
Fig.1
Fig.2
R.46
X2 CLASS (IEC 60384-14) - MKP
metallized POLYpropylene film CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
PRODUCT CODE: R46
Ø d ±0.05
p 15
0.6 or 0.8*
*See size table.
All dimensions are in mm.
p = 22.5
0.8
GENERAL TECHNICAL DATA
Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled. Box material is
solvent resistant and flame retardant according to UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/125/56 IEC 60068-1
Operating temperature range: -40 to +125°C
Related documents:
IEC 60384-14; EN 60384-14
electrical characteristics
Rated voltage (VR):
Capacitance range:
275 Vac (50/60Hz) / 560 Vdc
0.01µF to 1µF
test method and performance
Endurance:
Test conditions
Temperature:
Test duration:
+125°C±2°C
1000 h
Voltage applied:
Performance
1.25 x VR +1000Vac 0.1 s/h
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤ 10%
Insulation resistance:
50% of initial limit.
Approvals
ENEC
(**) IEC 60384-14
CSA
E 384-14-95
Class X2
File No.CA08.00063
Across-the-line
File No.154612
(LR83890)
NEW 125°C
Rated
Cap.
275 Vac / 560 Vdc
Std dimensions
BHL p
Max
Ød
dv/dt at
390Vdc
(V/ µs)
Part Number
0.010 µF 5.0 11.0 13.0 10.0 0.6
500 R46 K F 2100 - - H1 -
0.015 µF 5.0 11.0 13.0 10.0 0.6
500 R46 K F 2150 - - H1 -
0.022 µF 5.0 11.0 13.0 10.0 0.6
500 R46 K F 2220 - - H1 -
0.033 µF 5.0 11.0 13.0 10.0 0.6
500 R46 K F 2330 - - H1 -
0.047 µF 6.0 12.0 13.0 10.0 0.6
500 R46 K F 2470 - - H1 -
0.068 µF 6.0 12.0 13.0 10.0 0.6
500 R46 K F 2680 - - H1 M
0.010 µF 5.0 11.0 18.0 15.0 0.6
400 R46 K I 2100 - - H1 -
0.015 µF 5.0 11.0 18.0 15.0 0.6
400 R46 K I 2150 - - H1 -
0.022 µF 5.0 11.0 18.0 15.0 0.6
400 R46 K I 2220 - - H1 -
0.033 µF 5.0 11.0 18.0 15.0 0.6
400 R46 K I 2330 - - H1 -
0.047 µF 5.0 11.0 18.0 15.0 0.6
400 R46 K I 2470 - - H1 -
0.068 µF 5.0 11.0 18.0 15.0 0.6
400 R46 K I 2680 - - H1 -
0.10 µF 6.0 12.0 18.0 15.0 0.6
400 R46 K I 3100 - - H1 -
0.15 µF 6.0 17.5 18.0 15.0 0.6
400 R46 K I 3150 - - H2 -
0.15 µF 9.0 12.5 18.0 15.0 0.6
400 R46 K I 3150 - - H3 -
0.15 µF 7.5 13.5 18.0 15.0 0.6
400 R46 K I 3150 - - H1 -
0.22 µF 8.5 14.5 18.0 15.0 0.6
400 R46 K I 3220 - - H1 -
0.22 µF 6.0 17.5 18.0 15.0 0.6
400 R46 K I 3220 - - H2 M
0.22 µF 9.0 12.5 18.0 15.0 0.6
400 R46 K I 3220 - - H3 M
0.22 µF 7.5 18.5 18.0 15.0 0.8
400 R46 K I 3220 - - H4 -
0.33 µF 10.0 16.0 18.0 15.0 0.8
400 R46 K I 3330 - - H1 M
0.33 µF 7.5 18.5 18.0 15.0 0.8
400 R46 K I 3330 - - H2 M
0.33 µF 13.0 12.0 18.0 15.0 0.8
400 R46 K I 3330 - - H3 M
0.47 µF 11.0 19.0 18.0 15.0 0.8
400 R46 K I 3470 - - H1 M
0.15 µF 6.0 15.0 26.5 22.5 0.8
200 R46 K N 3150 - - H1 -
0.22 µF 6.0 15.0 26.5 22.5 0.8
200 R46 K N 3220 - - H1 -
0.33 µF 7.0 16.0 26.5 22.5 0.8
200 R46 K N 3330 - - H1 -
0.47 µF 10.0 18.5 26.5 22.5 0.8
200 R46 K N 3470 - - H1 -
0.68 µF 11.0 20.0 26.5 22.5 0.8
200 R46 K N 3680 - - H1 -
1.0 µF 13.0 22.0 26.5 22.5 0.8
200 R46 K N 4100 - - H1 -
UL 1414
up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
File No.E85238
Filters
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
(**) ENEC mark has replaced all the following European National
marks:
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
E12 Series available upon request
All dimensions are in mm
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 152 and contact
our Technical Service for choosing the safest solution.
05/2007
162

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet R46KNxxxxxx.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
R46KNxxxxxxMetallized Polypropylene Film CapacitorKemet Electronics
Kemet Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar