DataSheet.es    


PDF ET-3528B-111W Data sheet ( Hoja de datos )

Número de pieza ET-3528B-111W
Descripción ET-3528B-111W
Fabricantes Edison 
Logotipo Edison Logotipo



Hay una vista previa y un enlace de descarga de ET-3528B-111W (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! ET-3528B-111W Hoja de datos, Descripción, Manual

www.DataSheet4U.com
ET-3528B-111W
Features
High Luminous Intensity
- Base on InGaN / GaN technology
- Wide Viewing Angle : 120°
- Excellent Performance and Visibility
- Suitable for all SMT assembly methods
- IR reflow process compatible
- Environmental friendly; RoHS compliance
Typical Applications
Signal and Symbol Luminaire
- Indoor and Outdoor Displays
- Backlighting (illuminated advertising, general lighting)
- Interior Automotive Lighting
C Edison Opto Corporation. All rights Reserved

1 page




ET-3528B-111W pdf
www.DataSheet4U.com
VF Rank(Ta=25)
Bin Condition
VG
VH IF=20mA
VI
Min Max
2.8 3.1
3.1 3.4
3.4 3.6
- Forward voltage measurement allowance is ± 0.1V.
Luminous Intensity Rank(Ta=25)
Bin
Condition
Min Max
B 125 150
C 150 175
D 175 200
IF=20mA
E 200 250
F 250 300
G 300 350
Luminous Intensity Measurement Allowance is ± 10%.
Unit
V
Unit
mcd
-
Dominant Wavelength Rank(Ta=25)
Bin
Condition
Min Max Unit
X 465 470
Y
IF=20mA
nm
470 475
- Dominant Wavelength is measured with an accuracy of ± 1nm
EDISON OPTO CORPORATION
Version1.0
4
2007/07/29

5 Page





ET-3528B-111W arduino
www.DataSheet4U.com
Precaution for use
1. Storage
1.1 Before opening the package:
- The LEDs should be kept at <40& <90%RH. The LEDs should be
used within a year. When storing the LEDs, moisture proof package
with absorbent material (silica gel) is recommended.
1.2 After unpacking
- The LEDs should be kept at 30& ≦60%RH. The LEDs should be
soldered within 168 hours (7days) after opening the moisture proof
package.
- If unused LEDs remain, they should be stored in moisture proof
packages, such as sealed containers with moisture proof package
within absorbent material (silica gel).It is also recommended to
return the unused LEDs to the original moisture proof package and
to seal the moisture proof package again.
- If the moisture absorbent material (silica gel) vapors or expires the
expiration date, baking treatment should be performed by using the
following conditions.
baking treatment : 60for 20 hours.
- The LEDs electrode and leadframe comprise a silver plated copper
alloy. The silver surface may be affected by environments. Please
avoid conditions which may cause the LEDs being corroded or
discolored. The corrosion or discoloration might lower solderability
or affect optical characteristics.
- Please avoid rapid transition in ambient temperature, especially in
high humidity environments where condensation can occur.
2. Static electricity
- The products are sensitive to static electricity and highly taken care
when handling them.
- Static electricity or surge voltage will damage the LEDs. It is
recommended to wear an anti-electrostatic wristband or an
anti-electrostatic gloves when handling the LEDs.
- All devices, equipments and machinery must be properly grounded.
It is recommended that measures be taken against surge voltage to
the equipment that mounts the LEDs.
EDISON OPTO CORPORATION
Version1.0
10
2007/07/29

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet ET-3528B-111W.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ET-3528B-111WET-3528B-111WEdison
Edison
ET-3528B-111WET-3528R/T/B/A-111WEdison
Edison

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar