DataSheet.es    


PDF STA330 Data sheet ( Hoja de datos )

Número de pieza STA330
Descripción Wet Tantalum Capacitors
Fabricantes Vishay Intertechnology 
Logotipo Vishay Intertechnology Logotipo



Hay una vista previa y un enlace de descarga de STA330 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! STA330 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
STA
Vishay
Wet Tantalum Capacitors with Hermetic Seal
Vishay STA represents a major breakthrough in Wet Tantalum
capacitor technology. Its unique cathode system, also used
in the ST, provides the highest capacitance per unit volume
available. The STA combines the inherent reliability of wet
tantalum with the capacitance stability of solid tantalum, and
there are no circuit impedance restrictions. The range is
exceptionally well suited for low voltage filtering and energy
storage applications.
FEATURES
• Very High Capacitance
• 150 to 4700µF
• 6 to 15VDC
• - 55°C to + 85°C
APPLICATION NOTES
a) No continuous reverse voltage permissible.
b) Transient reverse voltage surges are acceptable under
the following conditions:
The peak reverse voltage does not exceed 1.5 volts and
the peak current times the duration of the reverse
transient does not exceed 0.05 ampere seconds. In
addition, the repetition frequency of the reverse voltage
surge is less than 10Hz.
c) The peak of the applied AC ripple and the applied
DC voltage must not exceed the DC voltage rating
of the capacitor.
d) Ripple current ratings by part number at 85 ºC and 40kHz
are included in the table. Ripple current correction factors
for other temperatures and frequencies are given on the
next page.
DIMENSIONS in inches (millimeters)
TERMINAL
WELDED TO CASE
0.250 (6.35)
MAX.
0.025 + 0.002
(0.64 + 0.05)
0.094 (2.38)
MAX.
E
L
CASE
CODE
T1
T2
T3
T4
Approx. Weight
D MAX.
INSULATED
0.219 (5.56)
0.312 (7.92)
0.406 (10.31)
0.406 (10.31)
T1: 2.3 grams,
T3: 9.4 grams,
D ± 0.016 (0.41)
UNINSULATED
0.188 (4.78)
0.281 (7.14)
0.375 (9.52)
0.375 (9.52)
T2: 5.7 grams
T4: 14.8 grams
ORDERING INFORMATION
STA
STYLE
2700
CAPACITANCE
µF
15
85°C
RATED DC
VOLTAGE
E
“D” DIA.
L + 0.031 - 0.016
(- 0.41)
E ± 0.250 (6.35)
0.453 (11.51)
1.500 (38.10)
0.641 (16.28)
0.250 (57.15)
0.766 (19.46)
2.250 (57.15)
1.062 (26.97)
2.250 (57.15)
NOTES:
1. Material at egress is tantalum.
2. Insulation sleeving will lap over the ends of the capacitor case.
3. Tinned nickel leads, solderable and weldable
T4
CASE
CODE
M
CAPACITANCE
TOLERANCE
M = ± 20%
K = ± 10%
I
INSULATING
SLEEVE
I = Insulated
X = Uninsulated
www.vishay.com
70
For technical questions, contact [email protected]
Document Number: 43013
Revision 28-Jul-03

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet STA330.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
STA330Wet Tantalum CapacitorsVishay Intertechnology
Vishay Intertechnology
STA3300Wet Tantalum CapacitorsVishay Intertechnology
Vishay Intertechnology
STA3300Wet Tantalum CapacitorsVishay Intertechnology
Vishay Intertechnology
STA331High efficiency class D codecSTMicroelectronics
STMicroelectronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar