|
|
PDF EP-5P945-3 Data sheet ( Hoja de datos )
| Número de pieza | EP-5P945-3 | |
| Descripción | Mother Board Manual | |
| Fabricantes | EPOX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EP-5P945-3 (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
User’s
Manual
Intel i945P / i945PL mainboard
for Intel Socket 775 processor
TRADEMARK
All products and company names are trademarks or registered trademarks of their
respective holders.
These specifications are subject to change without notice.
60000125PL311
Manual Revision 1.1
May 30, 2006
1 page  
www.DataSheet4U.com
Section 1 -- Introduction
Introduction
1-1 Package Contents
Contents
A. Mainboard
B. User’s manual
C. Floppy drive cable
D. HDD drive cable
E. CD (drivers and utilities)
F. I/O Shield
G. SATA II data cable
Optional items
H. Extra USB2.0 port cable
If you need the optional item, please
contact your dealer for assistance.
USER’S
MANUAL
C
D
AB
E
F
GH
1
5 Page 
www.DataSheet4U.com
Section 2 -- Installation
Introduction
Always have the power supply unplugged and powered off when
inserting and removing devices within the computer chassis.
2-1 CPU Installation
Step 1
Open load plate ( A ) , DO NOT touch socket contacts ( B ).
Step 2
Remove protective cover ( C ) from load plate. Please do not
discard the protective cover. Always replace the protective cover
if the processor is removed from the socket.
Step 3
Remove the processor from the protective cover. Do not
touch the bottom of the processor. The processor cover
should not be discarded. Always replace the processor cover if
the processor is removed from the socket.
Step 4
Hold the processor with thumb and index fingers as shown.
Ensure fingers align to the socket cutouts ( D ) , processor
notches ( E ) align to socket convexes ( F ). Place the
processor straight down without tilting or sliding in the socket.
The CPU is keyed to prevent incorrect insertion, do not
force the CPU into the socket. If it does not go in easily,
check for mis-orientation.
Fan Clips
Step 5
Place the fan heatsink onto the mainboard with the fasteners
align to the holes. Be care not to damage the thermal interface
material attached to the bottom of the heatsink. Rotate the
clips 90 degrees to lock the CPU cooler in place.
Connect the fan cable to the mainboard header JCPU_FAN.
When sending the mainboard for repair, please put back
this protective cover onto the socket.
7
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet EP-5P945-3.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EP-5P945-3 | Mother Board Manual | EPOX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |