|
|
PDF FS361-xxx Data sheet ( Hoja de datos )
| Número de pieza | FS361-xxx | |
| Descripción | Low Insertion Force PGA Sockets | |
| Fabricantes | Advanced Interconnections | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de FS361-xxx (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Low Insertion Force
PGA Sockets
5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 • Fax 401-823-8723 • Email [email protected] • Internet http://www.advintcorp.com
Molded & FR-4 Low Insertion Force PGA Sockets
.100
(2.54)
.062
(1.57)
Molded
PC Board
Features:
• As low as 1 oz.(28.34 g) average insertion
force per pin.
• Multiple finger contacts for reliability.
• Over 500 PGA footprints available.
• Closed bottom terminal for 100% anti-
wicking of solder.
• Tapered entry for ease of insertion.
• To fit .100” (2.54 mm) grid.
• Easily customized to fit your application.
Terminals and Contacts:
Terminal: Brass - Copper Alloy (C36000)
ASTM-B-16
Contact: Beryllium Copper (C17200)
ASTM-B-194
Solder Preform:
63% Tin, 37% Lead
Plating:
Terminal: Gold over Nickel or
Tin-Lead over Nickel
Contact: Gold over Nickel or
Tin-Lead over Nickel
Gold per MIL-G-45204
Tin-Lead per MIL-P-81728
Nickel per QQ-N-290
Body Material:
CS/CIS - Glass Filled Thermoplastic
Polyester (P.B.T.), U.L. Rated 94V-O,
-60˚C to 140˚C (-76˚F to 284˚F)
HCS/HCIS - High Temp. Glass Filled
Thermoplastic (P.P.S.) , U.L. Rated 94V-O,
-60˚C to 260˚C (-76˚F to 500˚F)
FS/FIS - FR-4 Fiberglass Epoxy Board,
U.L. Rated 94V-O, Index 140˚C (284˚F)
FR-4
PC Board
How To Order
1 oz. (28.34 g) Average Insertion Force Sockets
1 CIS 068 -01 T G
Footprint Dash #
If Applicable*
Body Type
CIS - Standard Molded
HCIS - High Temp. Molded
FIS - FR-4
Contact Plating
G - Gold
T - Tin-Lead
Terminal Plating
G - Gold
T - Tin-Lead
Number of Pins
004 to 484
*See pages 37 - 64
for PGA footprints
Terminal Type
See next page
for terminal types
How To Order
2.5 oz. (70.85 g) Average Insertion Force Sockets
1 CS 068 -01 T G
Footprint Dash #
If Applicable*
Body Type
CS - Standard Molded
HCS - High Temp. Molded
FS - FR-4
Contact Plating
G - Gold
T - Tin-Lead
Terminal Plating
G - Gold
T - Tin-Lead
Number of Pins
004 to 484
*See pages 37 - 64
for PGA footprints
Terminal Type
See next page
for terminal types
Sealant Options
RTV
Seal
RTV Sealed
To order: Add RTV to end of part #
Note: RTV not available with HCS or HCIS Insulators
Tape Sealed
To order: Add 3M to end of part #
Page 32
Products shown covered by patents issued and/or pending. Specifications subject to change without notice.
inch/(mm)
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet FS361-xxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| FS361-xxx | Low Insertion Force PGA Sockets | Advanced Interconnections |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |