|
|
PDF K9HAG08U1M Data sheet ( Hoja de datos )
| Número de pieza | K9HAG08U1M | |
| Descripción | Flash Memory | |
| Fabricantes | Samsung | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de K9HAG08U1M (archivo pdf) en la parte inferior de esta página. Total 44 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
K9HAG08U1M
K9L8G08U0M K9MBG08U5M
Preliminary
FLASH MEMORY
K9XXG08UXM
INFORMATION IN THIS DOCUMENT IS PROVIDED IN RELATION TO SAMSUNG PRODUCTS,
AND IS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE,
TO ANY INTELLECTUAL PROPERTY RIGHTS IN SAMSUNG PRODUCTS OR TECHNOLOGY. ALL
INFORMATION IN THIS DOCUMENT IS PROVIDED
ON AS "AS IS" BASIS WITHOUT GUARANTEE OR WARRANTY OF ANY KIND.
1. For updates or additional information about Samsung products, contact your nearest Samsung office.
2. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar
applications where Product failure could result in loss of life or personal or physical harm, or any military or
defense application, or any governmental procurement to which special terms or provisions may apply.
* Samsung Electronics reserves the right to change products or specification without notice.
1
1 page  
www.DataSheet4U.com
K9HAG08U1M
K9L8G08U0M K9MBG08U5M
Preliminary
FLASH MEMORY
PIN CONFIGURATION (TSOP1)
K9HAG08U1M-YCB0,PCB0/YIB0,PIB0
N.C
N.C
N.C
N.C
N.C
R/B2
R/B1
RE
CE1
CE2
N.C
Vcc
Vss
N.C
N.C
CLE
ALE
WE
WP
N.C
N.C
N.C
N.C
N.C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
48-pin TSOP1
Standard Type
12mm x 20mm
48 N.C
47 N.C
46 N.C
45 N.C
44 I/O7
43 I/O6
42 I/O5
41 I/O4
40 N.C
39 N.C
38 N.C
37 Vcc
36 Vss
35 N.C
34 N.C
33 N.C
32 I/O3
31 I/O2
30 I/O1
29 I/O0
28 N.C
27 N.C
26 N.C
25 N.C
PACKAGE DIMENSIONS
48-PIN LEAD/LEAD FREE PLASTIC THIN SMALL OUT-LINE PACKAGE TYPE(I)
48 - TSOP1 - 1220AF
Unit :mm/Inch
20.00±0.20
0.787±0.008
#1 #48
#24
0~8°
0.45~0.75
0.018~0.030
18.40±0.10
0.724±0.004
#25
1.00±0.05
0.039±0.002
01..02407MAX
0.05
0.002
MIN
(
0.50
0.020
)
5
5 Page 
www.DataSheet4U.com
K9HAG08U1M
K9L8G08U0M K9MBG08U5M
Preliminary
FLASH MEMORY
ABSOLUTE MAXIMUM RATINGS
Parameter
Voltage on any pin relative to VSS
Temperature Under Bias
Storage Temperature
Short Circuit Current
K9XXG08UXM-XCB0
K9XXG08UXM-XIB0
K9XXG08UXM-XCB0
K9XXG08UXM-XIB0
Symbol
VCC
VIN
VI/O
TBIAS
TSTG
Ios
Rating
-0.6 to + 4.6
-0.6 to + 4.6
-0.6 to Vcc+0.3 (<4.6V)
-10 to +125
-40 to +125
-65 to +150
5
Unit
V
°C
°C
mA
NOTE :
1. Minimum DC voltage is -0.6V on input/output pins. During transitions, this level may undershoot to -2.0V for periods <30ns.
Maximum DC voltage on input/output pins is VCC+0.3V which, during transitions, may overshoot to VCC+2.0V for periods <20ns.
2. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to the conditions
as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
RECOMMENDED OPERATING CONDITIONS
(Voltage reference to GND, K9XXG08UXM-XCB0 :TA=0 to 70°C, K9XXG08UXM-XIB0:TA=-40 to 85°C)
Parameter
Symbol
Min
Typ.
Max
Supply Voltage
VCC 2.7 3.3 3.6
Supply Voltage
VSS 0 0 0
Unit
V
V
DC AND OPERATING CHARACTERISTICS(Recommended operating conditions otherwise noted.)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Page Read with Serial Access
Operating
Current
Program
Erase
ICC1
ICC2
ICC3
tRC=30ns, CE=VIL, IOUT=0mA
-
-
-
-
-
15 30
15 30
mA
15 30
Stand-by Current(TTL)
ISB1 CE=VIH, WP=0V/VCC
- -1
Stand-by Current(CMOS)
ISB2 CE=VCC-0.2, WP=0V/VCC
- 20 100
Input Leakage Current
ILI VIN=0 to Vcc(max)
- - ±20 µA
Output Leakage Current
ILO VOUT=0 to Vcc(max)
- - ±20
Input High Voltage
Input Low Voltage, All inputs
Output High Voltage Level
Output Low Voltage Level
Output Low Current(R/B)
VIH(1)
VIL(1)
VOH IOH=-400µA
VOL IOL=2.1mA
IOL(R/B) VOL=0.4V
-
-
0.8 x Vcc
-
VCC+0.3
-0.3 - 0.2 x Vcc
V
2.4 -
-
- - 0.4
8 10 - mA
NOTE :
1. VIL can undershoot to -0.4V and VIH can overshoot to VCC + 0.4V for durations of 20 ns or less.
2. Typical value are measured at Vcc=3.3V, TA=25°C. Not 100% tested.
3. The typical value of the K9HAG08U1M’s ISB2 is 40µA and the maximum value is 200µA.
4. The typical value of the K9MBG08U5M’s ISB2 is 80µA and the maximum value is 400µA.
5. The maximum value of K9HAG08U1M’s ILI and ILO is ±40µA.
6. The maximum value of K9MBG08U5M’s ILI and ILO is ±80µA.
11
11 Page | ||
| Páginas | Total 44 Páginas | |
| PDF Descargar | [ Datasheet K9HAG08U1M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| K9HAG08U1M | Flash Memory | Samsung |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |