|
|
Número de pieza | DEMO908JL16 | |
Descripción | Start Kit | |
Fabricantes | Softec | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DEMO908JL16 (archivo pdf) en la parte inferior de esta página. Total 32 Páginas | ||
No Preview Available ! 1 page www.DataSheet4U.com
Contents
DEMO908JL16 User's Manual
1 Introduction 5
1.1 Overview 5
1.2 Package Contents 5
1.3 Supported Devices 5
1.4 Recommended Reading 5
1.5 Getting Technical Support 6
2 Hardware Features 7
2.1 Demonstration Board Features 7
3 Software Setup 9
3.1 Overview 9
3.2 Host System Requirements 9
3.3 Installing CodeWarrior Development Studio 9
3.4 Installing SofTec Microsystems Additional Components 10
4 Hardware Setup 11
4.1 First Connection 11
4.2 Power Supply 13
5 Operating Modes 15
5.1 Overview 15
5.2 Standalone Mode 15
5.3 Host Mode 15
6 Application Tutorial 17
6.1 Overview 17
6.2 Step-by-Step Tutorial 17
7 Summary of Jumper and Connector Settings 19
7.1 Jumpers 19
7.2 Connectors 20
8 Troubleshooting 25
8.1 USB Driver Problems 25
Page 3
5 Page www.DataSheet4U.com
3 Software Setup
DEMO908JL16 User's Manual
3.1 Overview
Note: before connecting the Demonstration Board to the PC, it is
i recommended that you install all of the required software first (see
below), so that the appropriate USB driver will be automatically found by
Windows when you connect the Demonstration Board.
The Demonstration Board requires that both CodeWarrior Development Studio Special Edition
and SofTec Microsystems Additional Components be installed in the host PC.
Note: CodeWarrior Development Studio for HC(S)08 must be installed
i first.
3.2 Host System Requirements
The Demonstration Board is controlled by CodeWarrior Development Studio. The following
hardware and software are required to run the CodeWarrior user interface together with the
Demonstration Board:
A 200-MHz (or higher) PC compatible system running Windows 98, Windows 2000 or
Windows XP;
128 MB of available system RAM plus 1 GB of available hard disk space;
A USB port;
CD-ROM drive for installation.
3.3 Installing CodeWarrior Development Studio
To install the CodeWarrior Development Studio Special Edition, insert the CodeWarrior CD-
ROM into your computer’s CD-ROM drive. A startup window will automatically appear. Follow
the on-screen instructions.
Page 9
11 Page |
Páginas | Total 32 Páginas | |
PDF Descargar | [ Datasheet DEMO908JL16.PDF ] |
Número de pieza | Descripción | Fabricantes |
DEMO908JL16 | Start Kit | Softec |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |