|
|
PDF 2SB1739 Data sheet ( Hoja de datos )
| Número de pieza | 2SB1739 | |
| Descripción | / NPN Epitaxial Planar Silicon Transistors | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 2SB1739 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Ordering number : ENA0437A
2SB1739 / 2SD2720
SANYO Semiconductors
DATA SHEET
2SB1739 / 2SD2720
Features
• Low saturation voltage.
• Contains diode between collector and emitter.
• Contains bias resistance between base and emitter.
• Large current capacity.
PNP / NPN Epitaxial Planar Silicon Transistors
Compact Motor Driver
Applications
Specifications ( ) : 2SB1739
Absolute Maximum Ratings at Ta=25°C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
Tc=25°C
Electrical Characteristics at Ta=25°C
Conditions
Parameter
Collector Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitterr Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Diode Forwad Voltage
Base-to-Emitter Resistance
Symbol
Conditions
ICBO
hFE1
hFE2
fT
Cob
VCE(sat)
VBE(sat)
V(BR)CBO
V(BR)CEO1
V(BR)CEO2
VF
RBE
VCB=(--)30V, IE=0A
VCE=(--)2V, IC=(--)0.5A
VCE=(--)2V, IC=(--)2A
VCE=(--)2V, IC=(--)0.5A
VCB=(--)10V, f=1MHz
IC=(--)2A, IB=(--)100mA
IC=(--)2A, IB=(--)100mA
IC=(--)10µA, IE=0A
IC=(--)10µA, RBE=∞
IC=(--)10mA, RBE=∞
IF=(--)0.5A
Ratings
(--)40
(--)30
(--)6
(--)3
(--)5
1
15
150
--55 to +150
Unit
V
V
V
A
A
W
W
°C
°C
Ratings
min typ
70
50
100
(55)40
(--0.28)0.23
(--)40
(--)40
(--)30
0.8
max
(--)1.0
(--0.6)0.5
(--)1.5
(--)1.5
Unit
µA
MHz
pF
V
V
V
V
V
V
kΩ
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
83006 MS IM / 72006EA MS IM TC-00000064 No. A0437-1/5
1 page  
2SB1739 / 2SD2720
ASO
10
7 ICP=5A
5
3 IC=3A
2
1.0
7
5
3
2
0.1
DC
operation,
PC
1001m0ms s
=1W
1ms
(No heat sink)
7 2SB1739 / 2SD2720
5 Ta=25°C
3 Single Pulse
2 Mounted on a ceramic board (250mm2!0.8mm)
0.01 For PNP minus sign is omitted.
0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5
Collector-to-Emitter Voltage, VCE -- V IT11169
PC -- Tc
16
15 2SB1739 / 2SD2720
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0 20 40 60 80 100 120 140 160
Case Temperature, Tc -- °C
IT11171
PC -- Ta
1.1
2SB1739 / 2SD2720
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0 20 40 60 80 100 120 140 160
Ambient Temperature, Ta -- °C
IT11170
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of August, 2006. Specifications and information herein are subject
to change without notice.
PS No. A0437-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet 2SB1739.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 2SB173 | (2SB170 - 2SB175) Ge PNP Alloy Junction |  ETC |
| 2SB1730 | General purpose amplification |  ROHM Semiconductor |
| 2SB1731 | Low frequency amplifier | ROHM Semiconductor |
| 2SB1732 | Genera purpose amplification | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |