DataSheet.es    


PDF AZ10E116 Data sheet ( Hoja de datos )

Número de pieza AZ10E116
Descripción ECL/PECL Quint Differential Line Receiver
Fabricantes Arizona Microtek 
Logotipo Arizona Microtek Logotipo



Hay una vista previa y un enlace de descarga de AZ10E116 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! AZ10E116 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
ARIZONA MICROTEK, INC.
AZ10E116
AZ100E116
ECL/PECL Quint Differential Line Receiver
FEATURES
PACKAGE AVAILABILITY
500ps Maximum Propagation Delay
PACKAGE PART NUMBER MARKING NOTES
Dedicated VCCO Pin for Each Receiver
Operating Range of 4.2V to 5.46V
PLCC 28
AZ10E116FN
AZM10E116
<Date Code>
1,2
75kΩ Internal Input Pulldown Resistors
PLCC 28
Direct Replacement for ON Semiconductor
AZ100E116FN
AZM100E116
<Date Code>
1,2
MC10E116 & MC100E116
1 Add R2 at end of part number for 13 inch (2.5K parts) Tape & Reel.
2 Date code format: “YY” for year followed by “WW” for week.
DESCRIPTION
The AZ10/100E116 is a quint differential line receiver with emitter-follower outputs. The E116 provides a VBB
output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input
applications, the VBB reference should be connected to one side of the Dn/D¯ n differential input pair. The input
signal is then fed to the other Dn/D¯ n input. The VBB pin should be used only as a bias for the E116 as its sink/source
capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01μF capacitor.
The receiver design features clamp circuitry to cause a defined state if both the inverting and non-inverting
inputs are left open; in this case the Q output goes LOW, while the Q¯ output goes HIGH. This feature makes the
device ideal for twisted pair applications.
If both inverting and non-inverting inputs are at an equal potential of > VCC -2.5V, the receiver does not go
to a defined state. This condition may produce output voltage levels between HIGH and LOW.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
1630 S. STAPLEY DR., SUITE 127 MESA, ARIZONA 85204 USA (480) 962-5881 FAX (480) 890-2541
www.azmicrotek.com

1 page




AZ10E116 pdf
AZ10E116
AZ100E116
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc.
makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona
Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license
rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems
intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a
situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly
or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part.
November 2006 * REV - 3
www.azmicrotek.com
5

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet AZ10E116.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AZ10E1111:9 Differential Clock DriverArizona
Arizona
AZ10E116ECL/PECL Quint Differential Line ReceiverArizona Microtek
Arizona Microtek

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar