|
|
Número de pieza | GP1A05A2J00F | |
Descripción | OPIC Output Transmissive Photointerrupter | |
Fabricantes | Sharp Electrionic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GP1A05A2J00F (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! www.DataSheet4U.com
GP1A05AJ000F
Series
GP1A05AJ000F Series
Gap : 5mm, Slit : 0.5mm
*OPIC Output
Transmissive Photointerrupter
with Connector
■ Description
GP1A05AJ000F Series are standard, OPIC output,
transmissive photointerrupters with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are insert-
ed in a case, and a 3-pin connector is included to allow
remote-mount or off-board designs.
■ Features
1. Transmissive with OPIC output
2. Highlights :
• Includes additional screw fixing holes
• Positioning Pin to prevent misalignment
3. Key Parameters:
• Gap Width : 5mm
• Slit Width (detector side) : 0.5mm
• Package : 34×18×11mm (without connector and
positloning pin)
• Connector : GP1A05AJ000F ; Tyco Electronics
AMP K.K. (PN : 171825-3)
GP1A05A2J00F ; J.S.T. Mfg Co., Ltd.
(PN : B3P-SHF-IAA (LF))
GP1A05A5J00F ; Molex-Japan Co.,
Ltd. (PN : 5267-03A)
• Output Type : High when the object is present with
Pullup Resistor
4. Lead free and RoHS directive compliant
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or mo-
tion.
2. Example: PPC, FAX, Printer
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A04501EN
1 Date Oct. 3. 2005
© SHARP Corporation
1 page ■ Absolute Maximum Ratings
Parameter
Supply GP1A05AJ000F
voltage GP1A05A2J00F/GP1A05A5J00F
*1 Output voltage
*2 Low level output current
*3 Operating temperature
*3 Storage temperature
∗1 Collector-emitter voltage of output transistor.
∗2 Collector current of output transistor, refer to Fig.1.
∗3 The connector should be plugged in/out at normal temperature.
Symbol
VCC
VOUT
IOL
Topr
Tstg
(Ta=25˚C)
Rating
Unit
−0.5 to +10
−0.5 to +8
V
−0.5 to +28 V
50 mA
−20 to +75 ˚C
−40 to +85 ˚C
GP1A05AJ000F Series
■ Electro-optical Characteristics
Parameter
Symbol
Conditions
Low level supply current
ICCL
Light beam uninterrupted
Low level output voltage
VOL Light beam uninterrupted, IOL=16mA
High level supply current
ICCH
Light beam interrupted
High level output voltage
*4 Response frequency
VOH Light beam interrupted, RL=47kΩ
f RL=47kΩ
Operating supply voltage
VCC
−
*5 Response time
Rise time
Fall time
tr
tf
RL=280Ω
∗4 Response frequency is measured with the disk shown below being rotated.
∗5 Refer to Fig.7.
MIN.
−
−
−
VCC×0.9
−
4.5
−
−
(VCC=5V, Ta=25˚C)
TYP. MAX. Unit
− 30 mA
− 0.35 V
− 30 mA
− −V
− 3 000 Hz
− 5.5 V
0.1 0.5 μs
0.05 0.5
μs
Disk
(Unit : mm)
0.5 0.5
Sheet No.: D3-A04501EN
5
5 Page ■ Package specification
● Case package
Package materials
Anti-static plastic bag : Polyethtylene
Moltopren : Urethane
Partition : Corrugated fiberboard
Packing case : Corrugated fiberboard
GP1A05AJ000F Series
Package method
75 pcs of products shall be packaged in a plastic bag, Ends shall be sealed by stapler. The bottom ot the
packing case is covered with moltopren, and the partition is set in the packing case. Each partition should
have 1 plastic bag.
Moltopren should be located after all product are settled (1 packing conteains 150 pcs).
Packing composition
Moltopren
Plastic bag
Packing case
Sheet No.: D3-A04501EN
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet GP1A05A2J00F.PDF ] |
Número de pieza | Descripción | Fabricantes |
GP1A05A2J00F | OPIC Output Transmissive Photointerrupter | Sharp Electrionic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |