|
|
Número de pieza | KSM-605LM2E | |
Descripción | (KSM-60xLM2E) Infrared receiver modules | |
Fabricantes | KODENSHI | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de KSM-605LM2E (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Infrared receiver modules
KSM-60LM2E
The KSM-60LM2E consist of a PIN Photodiode of high
speed and a preamplifier IC in the package as an receiver
for Infrared remote control systems
DIMENSIONS
Features
• One mold small size package
• Wide supply-voltage range : 2.7V to 5.5V
• Shielded against electrical field disturbance
• High immunity against ambient light disturbances
(Logic Controller Adaptation)
• Available for carrier frequencies between 32.7KHz to 56.9KHz
• TTL and CMOS compatible
Applications
• Audio & Video Applications (TV, VTR, Audio, DVDP, CDP)
• Home Appliances (Air conditioner, Computer, Camcoder)
• Wireless Toys
• Remote Control Equipment
Maximum Ratings
Parameter
Supply Voltage
Operating Temperature
Storage Temperature
Soldering Temperature
Symbol
Vcc
Topr
Tstg
Tsol
Ratings
6.0
-10 ~ +60
-20 ~ +75
260
(Max 5 sec)
[Ta=25]
Unit
V
B.P.F Center Frequency
Model No.
KSM-601LM2E
KSM-602LM2E
KSM-603LM2E
KSM-604LM2E
KSM-605LM2E
B.P.F Center Frequency(KHz)
40.0
36.7
37.9
32.7
56.9
Electro-Optical Characteristics
Parameter
Recommended Supply Voltage
Current Consumption
Peak Wavelength
*1
B.P.F Center Frequency
Transmission Distance
*1
High level Output voltage
*1
Low level Output voltage
*1
High level Output Pulse Width *1
Low level Output Pulse Width *1
Output Form
Symbol
Vcc
Icc
p
fo
L
VOH
VOL
TWH
TWL
[Ta=25
Condition
Min. Typ.
2.7 -
No signal input
0.5 1.2(1.0)
- 940
- 37.9
250±50lx
0°
±30 °
12
9
-
-
30cm over
4.5(2.8)
5.0(3.0)
the ray axis
- 0.1
Burst wave=600us 500 600
Period = 1.2ms
500 600
Active Low Output
, Vcc=5.0V(Vcc=3.0V)]
Max.
5.5
Unit
V
1.7
-
-
-m
-
-V
0.5 V
700
700
*1. It specifies the maxmum distance between emitter and detector that the output wave form satisfies the standard under the conditions
below against the standard transmitter.
1) Measuring place : Indoor without extreme reflection of light
2) Ambient light source : Detecting surface illumination shall be irradiate 200±50lx under ordinary white fluorescence lamp without
high frequency lightning
3) Standard transmitter: Burst wave of standard transmitter shall be arranged to 50mVP-P under the measuring circuit
1/2
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet KSM-605LM2E.PDF ] |
Número de pieza | Descripción | Fabricantes |
KSM-605LM2E | (KSM-60xLM2E) Infrared receiver modules | KODENSHI |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |