DataSheet.es    


PDF B3774 Data sheet ( Hoja de datos )

Número de pieza B3774
Descripción SAW Components
Fabricantes EPCOS 
Logotipo EPCOS Logotipo



Hay una vista previa y un enlace de descarga de B3774 (archivo pdf) en la parte inferior de esta página.


Total 9 Páginas

No Preview Available ! B3774 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
SAW Components
SAW filter
Short range devices
Series/type:
Ordering code:
Date:
Version:
B3774
B39431B3774Z810
May 17, 2006
2.1
© EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

1 page




B3774 pdf
SAW Components
B3774
SAW filter
433.92 MHz
Data sheet
Matching network to 50 (element values depend on pcb layout and equivalent circuit)
Cp1 = 3.3 pF
Ls2 = 33 nH
Ls3 = 33 nH
Cp4 = 3.3 pF
Minimising the crosstalk
For a good ultimate rejection a low crosstalk is necessary. Low crosstalk can be realised with a good
RF layout. The major crosstalk mechanism is caused by the “ground-loop” problem.
Grounding loops are created if input-and output transducer GND are connected on the top-side of
the PCB and fed to the system grounding plane by a common via hole. To avoid the common
ground path, the ground pin of the input- and output transducer are fed to the system ground plane
(bottom PCB plane) by their own via hole. The transducers’ grounding pins should be isolated from
the upper grounding plane.
A common GND inductivity of 0.5nH degrades the ultimate rejection (crosstalk) by 20dB.
The optimised PCB layout, including matching network for transformation to 50 Ohm, is shown
here. In this PCB layout the grounding loops are minimised to realise good ultimate rejection
Optimised PCB layout for SAW filters in QCC8B package, pinning 2,5 (top side, scale 1:1)
The bottom side is a copper plane (system ground area). The input and output grounding pins are
isolated and connected to the common ground by separated via holes.
For good contact of the upper grounding area with the lower side it is necessary to place enough
via holes.
Please read cautions and warnings and
important notes at the end of this document.
5 May 17, 2006

5 Page










PáginasTotal 9 Páginas
PDF Descargar[ Datasheet B3774.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
B3770SAW ComponentsEPCOS
EPCOS
B3771SAW ComponentsEPCOS
EPCOS
B3772SAW ComponentsEPCOS
EPCOS
B3773SAW ComponentsEPCOS
EPCOS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar