|
|
PDF EV2995-10 Data sheet ( Hoja de datos )
| Número de pieza | EV2995-10 | |
| Descripción | G2995 Evaluation Board Manual | |
| Fabricantes | GMT | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EV2995-10 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Global Mixed-mode Technology
EV2995-10
G2995 Evaluation Board Manual
Introduction
The G2995 evaluation board is designed to provide the design engineer with a fully functional prototype system
in which to evaluate the G2995 in both a static environment and with a complete memory system. It is one version
of the board, which SOP-8L(FD) is used. The application note contains information regarding the board,for more in-
formation regarding the G2995 please refer to the datasheet.
Schematic
The following schematic was used to create the layout.
Bill of Material
Name
U1
C3, C5
C6
C1, C2
Qty Value
Description
Manufacturer
1
G2995 DDR Linear Regulator
Global Mixed-mode Tech-
nology
http://www.gmt.com.tw
2 330uf 6.3V POSCAP Series
SANYO
1 68uf 6.3V POSCAP Series
SANYO
2 0.1uf 0603 Ceramic Capacitor X7R 6.3V TDK
Model Number
G2995
6TPD330M
6TPB68M
1068X7R1H104K
Application
The G2995 evaluation board can be used immediately in either a static test environment to check functionality
or in a memory termination scheme on a motherboard. In either implementation the following steps should be
taken to ensure correct operation.
1. Correct leads from the evaluation board. The board layout has been designed to allows sockets to be directly sol-
dered.
2. AVIN and PVIN should be connected to a 2.5V power supply.
3. The VDDQ input provides the internal divide by two reference voltage. Both VREF and VTT will track this
internal voltage, nominally a 2.5V will be applied.
4. The VREF pad is the output for the VREF from the G2995 after being bypassed by a ceramic capacitor.
This can be connected either to a multi-meter for confirmation or directly to the memory controller and DIMMS.
5. The remaining two pads are for the force and sense leads of the VTT output. These should be connected
directly to the termination plane or a multi-meter if interested in verification. The output will be regulated where the
VSENSE leads connect to the VTT leads permitting the connection to a motherboard without suffering from large
resistance drops.
Mar 12, 2003
TEL: 886-3-5788833
http://www.gmt.com.tw
1
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet EV2995-10.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EV2995-10 | G2995 Evaluation Board Manual | GMT |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |