DataSheet.es    


PDF GM5110-H Data sheet ( Hoja de datos )

Número de pieza GM5110-H
Descripción (GM5110 / GM5120) XGA/SXGA LCD Controller
Fabricantes ETC 
Logotipo ETC Logotipo



Hay una vista previa y un enlace de descarga de GM5110-H (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! GM5110-H Hoja de datos, Descripción, Manual

www.DataSheet4U.com
Genesis Microchip Publication
PRELIMINARY DATA SHEET
gm5110/gm5110-H
gm5120/gm5120-H
XGA/SXGA LCD Controller
*** Genesis Microchip Confidential ***
NOTE: Sections in this data sheet that mention HDCP apply only to the HDCP-enabled chip
versions (gm5110-H and gm5120-H). All other sections apply to all chip versions (gm5110,
gm5110-H, gm5120, and gm5120-H).
Publication number: C5110-DAT-01C
Publication date: June 2002
Genesis Microchip Inc.
2150 Gold Street, Alviso, P.O. Box 2150, CA USA 95002 Tel: (408) 262-6599 Fax: (408) 262-6365
165 Commerce Valley Dr. West, Thornhill, ON Canada L3T 7V8 Tel: (905) 889-5400 Fax: (905) 889-5422
1096, 12thA Main, Hal II Stage, Indira Nagar, Bangalore-560 008, India, Tel: (91)-80-526-3878, Fax: (91)-80-529-6245
4F, No. 24, Ln 123, Sec 6, Min-Chuan E. Rd., Taipei, Taiwan, ROC Tel: 886-2-2791-0118 Fax: 886-2-2791-0196
143-37 Hyundai Tower, #902, Samsung-dong, Kangnam-gu, Seoul, Korea 135-090 Tel 82-2-553-5693 Fax 82-2-552-4942
Rm2614-2618 Shenzhen Office Tower, 6007 Shennan Blvd, 518040, Shenzhen, Guandong, P.R.C., Tel (0755)386-0101, Fax (0755)386-7874
2-9-5 Higashigotanda, Shinagawa-ku, Tokyo, 141-0022, Japan, Tel 81-3-5798-2758, Fax 81-3-5798-2759
www.genesis-microchip.com / [email protected]

1 page




GM5110-H pdf
*** Genesis Microchip Confidential ***
gm5110/20 Preliminary Data Sheet
4.8.2 Horizontal and Vertical Shrink ........................................................................................... 26
4.8.3 Moiré Cancellation ............................................................................................................. 27
4.9 Bypass Options .......................................................................................................................... 27
4.10 Gamma LUT ............................................................................................................................ 27
4.11 Display Output Interface.......................................................................................................... 27
4.11.1 Display Synchronization................................................................................................... 27
4.11.2 Programming the Display Timing .................................................................................... 28
4.11.3 Panel Power Sequencing (PPWR, PBIAS) ....................................................................... 29
4.11.4 Output Dithering ............................................................................................................... 30
4.12 Energy Spectrum Management (ESM) .................................................................................... 30
4.13 OSD.......................................................................................................................................... 30
4.13.1 On-Chip OSD SRAM ....................................................................................................... 31
4.13.2 Color Look-up Table (LUT) ............................................................................................. 32
4.14 On-Chip Microcontroller (OCM)............................................................................................. 32
4.14.1 Standalone Configuration ................................................................................................. 33
4.14.2 Full-Custom Configuration............................................................................................... 34
4.14.3 General Purpose Inputs and Outputs (GPIO’s)................................................................. 35
4.15 Bootstrap Configuration Pins................................................................................................... 35
4.16 Host Interface........................................................................................................................... 36
4.16.1 Host Interface Command Format...................................................................................... 37
4.16.2 2-wire Serial Protocol ....................................................................................................... 37
4.17 Miscellaneous Functions.......................................................................................................... 39
4.17.1 Low Power State............................................................................................................... 39
4.17.2 Pulse Width Modulation (PWM) Back Light Control ...................................................... 39
5. Electrical Specifications ................................................................................................................... 40
5.1 Preliminary DC Characteristics ................................................................................................. 40
5.2 Preliminary AC Characteristics ................................................................................................. 41
6. Ordering Information ....................................................................................................................... 43
7. Mechanical Specifications................................................................................................................ 44
June 2002
iv C5110-DAT-01C

5 Page





GM5110-H arduino
*** Genesis Microchip Confidential ***
gm5110/20 Preliminary Data Sheet
3. GM5110/20 PIN LIST
I/O Legend: A = Analog, I = Input, O = Output, P = Power, G= Ground
Pin Name
AVDD_RED
RED+
RED-
AGND_RED
AVDD_GREEN
GREEN+
GREEN-
AGND_GREEN
AVDD_BLUE
BLUE+
BLUE-
AGND_BLUE
AVDD_ADC
ADC_TEST
AGND_ADC
SGND_ADC
GND1_ADC
VDD1_ADC_2.5
GND2_ADC
VDD2_ADC_2.5
No.
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
156
155
154
153
Table 1. Analog Input Port
I/O Description
AP Analog power (3.3V) for the red channel. Must be bypassed with decoupling capacitor to
AGND_RED pin on system board (as close as possible to the pin).
AI Positive analog input for Red channel.
AI Negative analog input for Red channel.
AG Analog ground for the red channel.
Must be directly connected to the analog system ground plane.
AP Analog power (3.3V) for the green channel. Must be bypassed with decoupling capacitor to
AGND_GREEN pin on system board (as close as possible to the pin).
AI Positive analog input for Green channel.
AI Negative analog input for Green channel.
AG Analog ground for the green channel.
Must be directly connected to the analog system ground plane.
AP Analog power (3.3V) for the blue channel. Must be bypassed with decoupling capacitor to
AGND_BLUE pin on system board (as close as possible to the pin).
AI Positive analog input for Blue channel.
AI Negative analog input for Blue channel.
AG Analog ground for the blue channel.
Must be directly connected to the analog system ground plane.
AP Analog power (3.3V) for ADC analog blocks that are shared by all three channels. Includes
band gap reference, master biasing and full-scale adjust. Must be bypassed with
decoupling capacitor to AGND_ADC pin on system board (as close as possible to the pin).
AO Analog test output for ADC Do not connect.
AG Analog ground for ADC analog blocks that are shared by all three channels. Includes band
gap reference, master biasing and full-scale adjust.
Must be directly connected to analog system ground plane.
AG Dedicated pad for substrate guard ring that protects the ADC reference system.
Must be directly connected to the analog system ground plane.
G Digital GND for ADC clocking circuit.
Must be directly connected to the digital system ground plane
P Digital power (2.5V) for ADC encoding logic. Must be bypassed with decoupling capacitor to
GND1_ADC pin on system board (as close as possible to the pin).
G Digital GND for ADC clocking circuit.
Must be directly connected to the digital system ground plane.
P Digital power (2.5V) for ADC encoding logic. Must be bypassed with decoupling capacitor to
GND2_ADC pin on system board (as close as possible to the pin).
June 2002
4 C5110-DAT-01C

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet GM5110-H.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
GM5110-H(GM5110 / GM5120) XGA/SXGA LCD ControllerETC
ETC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar