|
|
PDF MASWSS0100 Data sheet ( Hoja de datos )
| Número de pieza | MASWSS0100 | |
| Descripción | GaAs SP3T 2.5 V High Power Switch | |
| Fabricantes | Tyco Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MASWSS0100 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
GaAs SP3T 2.5 V High Power Switch
0.1 - 3.0 GHz
Features
• Low Voltage Operation: 2.5V
• Low Harmonics: -70 dBc at +34 dBm & 1 GHz
• Low Insertion Loss: 0.5 dB at 1 GHz
• High Isolation: 20 dB at 2 GHz
• 0.5 micron GaAs PHEMT Process
• Supplied as Known Good Die
Description
M/A-COM’s MASWSS0100 is a GaAs PHEMT
MMIC single pole three throw (SP3T) high power
switch die. The MASWSS0100 is ideally suited for
applications where high power, low control voltage,
low insertion loss, high isolation, small size and low
cost are required.
Typical applications are for GSM, DCS and PCS
handset systems that connect separate transmit and
receive functions to a common antenna, as well as
other handset and related applications. This part
can be used in all systems operating up to 2.5 GHz
requiring high power at low control voltage.
The MASWSS0100 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information1
Part Number
Product Description
MASWSS0100-DIE
Separated Die on Grip Ring1
1. Die quantity varies.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Input Power
+38 dBm
Voltage
± 8.5 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Die Bond Pad Layout
MASWSS0100
V2
V1 RFC
V3
RF1 RF2 V2 RF3
Pad Configuration
Pad Name
V1
RF1
RF2
V2
RF3
V3
RFC
Description
Control 1
RF Port 1
RF Port 2
Control 2
RF Port 3
Control 3
Antenna/Common Port
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet MASWSS0100.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MASWSS0100 | GaAs SP3T 2.5 V High Power Switch | Tyco Electronics |
| MASWSS0102 | SPST High Isolation CATV Switch | Tyco Electronics |
| MASWSS0103 | SPST High Isolation CATV Switch | Tyco Electronics |
| MASWSS0107 | GaAs Broadband DPDT Diversity Switch | Tyco Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |