|
|
Número de pieza | MAPCGM0001-DIE | |
Descripción | Phase Shifter | |
Fabricantes | Tyco Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAPCGM0001-DIE (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Phase Shifter
1.0-1.9 GHz
Features
♦ 6 Bit Phase Shifter
♦ 360º Coverage, LSB = 5.6º
♦ TTL Control Inputs
♦ MSAG™ Process
MAPCGM0001-DIE
903215 —
Preliminary Information
Description
The MAPCGM0001-Die is a 6-bit Phase Shifter with Parallel TTL
Input Control. This product is fully matched to 50 ohms on both
the input and output. The part has 360º of phase coverage with
LSB of 5.6º.
Fabricated using M/A-COM’s repeatable, high performance and
highly reliable GaAs Multifunction Self-Aligned Gate (MSAG™)
Process, each device is 100% RF tested on wafer to ensure
performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like manufac-
turing processes, planar processing of ion implanted transistors,
multiple implant capability enabling power, low-noise, switch and
digital FETs on a single chip, and polyimide scratch protection for
ease of use with automated manufacturing processes. The use of
refractory metals and the absence of platinum in the gate metal
formulation prevents hydrogen poisoning when employed in her-
metic packaging.
Primary Applications
♦ Satellite Communication
♦ Phased Array Radar
Absolute Maximum Conditions 1
Parameter
Input Power
Digital Supply Voltage
Digital Supply Current
Junction Temperature
Storage Temperature
Symbol
PIN
VEE
IEE
Tj
TST G
Absolute Maximum
36
-6.0
20
180
-55 to +150
Units
dBm
V
mA
°C
°C
1. Operation outside of these ranges may reduce product reliability. Operation at other than the typical values may
result in performance outside the guaranteed limits.
Recommended Operating Conditions
Characteristic
Symbol
Digital Supply Voltage
Control Voltage
Logic High
Logic Low
VEE
V control pads
Min
-5.2
2.8
0
Typ Max Unit
-5 -4.8
V
55V
0 0.4 V
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page Phase Shifter
1.0-1.9 GHz
Assembly and Bonding Diagram
100 pF
0.1 μF
VEE
RFIN
IN
P0 P1 P2 VEE P3 P4 P5
6
MAPCGM0001-DIE
903215 —
Preliminary Information
CONTROL
INPUTS
RFOUT
OUT
Figure 8. Recommended bonding diagram for pedestal mount.
Support circuitry typical of MMIC characterization.
Truth Table3
Designation
P5
P4
P3
VEE
P2
P1
P0
Description
180° Phase Bit : MSB
90° Phase Bit
45° Phase Bit
Digital Supply Voltage
22.5° Phase Bit
11.2° Phase Bit
5.6° Phase Bit : LSB
3. All Phase Bits at Logic Low = Reference State.
Level
Logic High
Logic High
Logic High
-5V
Logic High
Logic High
Logic High
State
Phase Shift ≈ -180°
Phase Shift ≈ -90°
Phase Shift ≈ -45°
ON
Phase Shift ≈ -22.5°
Phase Shift ≈ -11.2°
Phase Shift ≈ -5.6°
Assembly Instructions:
Die attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 300 °C to less than 5 minutes.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge bond techniques.
For DC pad connections, use either ball or wedge bonds. For best RF performance, use wedge
bonds of shortest length, although ball bonds are also acceptable.
Biasing Note: Must apply negative bias to VEE before applying positive bias to Control Pads.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet MAPCGM0001-DIE.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAPCGM0001-DIE | Phase Shifter | Tyco Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |