DataSheet.es    


PDF MADRMA0001 Data sheet ( Hoja de datos )

Número de pieza MADRMA0001
Descripción (MADRMA0001 / MADRMA0002) Quad Bias Driver
Fabricantes Tyco Electronics 
Logotipo Tyco Electronics Logotipo



Hay una vista previa y un enlace de descarga de MADRMA0001 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! MADRMA0001 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
Quad Bias Driver for GaAs FET and PIN Diode Switches
Description The MADRMA0001 family of quad bias drivers
can either be configured to translate TTL signals into the nega-
tive voltages required for GaAs FET switches or attenuators or they
can be used to produce up to ± 40 mA per channel for biasing series
or shunt PIN diode switches. Each channel contains Inverting and
Non-Inverting Outputs for logic flexibility. Designed with high-speed
CMOS technology, the drivers achieve high performance with very
low power dissipation.
Features
Propagation Delay less than 25 nS
Complementary Outputs
High positive and negative output currents
True TTL Inputs
Low Quiescent Power Dissipation
Available in DIE and QFN-20 Surface Mount Package formats
Available in Pb-free RoHS compliant package or Sn/Pb plated
package for Military applications (No Pure Sn)
MADRMA0001:
Die
MADRMA0002:
QFN-20, Tin Plating (Sn, 100%)
MADR-007690-DR0002: QFN-20, Tin-Lead Plating (Sn/Pb, 85%/15%)
MADRMA0001 & 2
MADR-007690-DR0002
AC & DC Characteristics Over Guaranteed Operating Temperature Range
Symbol
VIH
VIL
VOH
VOL
IIN
Rout
IOH
IOL
ICC
TPHL, TPLH
TTHL, TTLH
Parameter
Input HIGH Voltage
Input LOW Voltage
Output HIGH Voltage
Output LOW Voltage
Input Current
Output Resistance
DC Output Current – HIGH
DC Output Current – LOW
Quiescent Supply Current
Propagation Delay
Output Transition Time
Delay Skew, Output A to Output B
Minimum Pulse Width
Maximum PRF
Test Conditions
Units
V
V
No Load
V
No Load
VIN = VCC or GND
Set by external resistors, R2
or R3
Set by external resistors, R2
or R3
V
µA
mA
mA
VCC = Max, Vin = Vcc or GND
µA
–40° C to + 85° C
nS
–40° C to + 85° C
nS
–40° C to + 85° C
nS
nS
MHz
Min
2.0
-0.8
VOPT – 0.1
-20
30
Typ
0
40
15
3
3
Max
Vcc
0.8
-
VEE + 0.1
20
60
40
-40
400
25
6
6
15
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

1 page




MADRMA0001 pdf
Quad Bias Driver for GaAs FET and PIN Diode Switches MADRMA0001 & 2
MADR-007690-DR0002
Application Information
The input logic voltage (V in) cannot exceed the positive supply (Vcc) by more than 0.5 V nor go be-
low GND by more than 0.5 V.
The input current should not exceed ± 25 mA.
This device should be treated as any TTL CMOS circuit. Pull-up/down resistors should tie to Vcc or
GND. Non-used inputs must be tied to GND. Decoupling caps (0.1 uF) should be used on Vcc and
Vee, and the output current should be limited to ± 40 mA.
Logic “0” sets J0 to J1 to low loss state
Limiting Resistors (R2, R3) set for +/- 20 mA output current
The value of the limiting resistors (R2, R3) is determined by the following: R1 = [(Vcc - Vdiode)/I de-
sired] - Rout
Driving PIN Diode Switches:
Driving FET Switches:
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet MADRMA0001.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MADRMA0001(MADRMA0001 / MADRMA0002) Quad Bias DriverTyco Electronics
Tyco Electronics
MADRMA0002(MADRMA0001 / MADRMA0002) Quad Bias DriverTyco Electronics
Tyco Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar