DataSheet.es    


PDF MAATSS0018 Data sheet ( Hoja de datos )

Número de pieza MAATSS0018
Descripción Digital Attenuator
Fabricantes Tyco Electronics 
Logotipo Tyco Electronics Logotipo



Hay una vista previa y un enlace de descarga de MAATSS0018 (archivo pdf) en la parte inferior de esta página.


Total 3 Páginas

No Preview Available ! MAATSS0018 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
Digital Attenuator, 1-Bit, 10 dB Step
DC - 2.0 GHz
Features
Single 10 dB Step
Low Loss: 0.3 dB @ 900 MHz
Lead-Free SOT-25 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of AT-266
Description
M/A-COM’s MAATSS0018 is a 1 bit, 10 dB step
GaAs MMIC digital attenuator in a lead-free SOT-25
surface mount plastic package. The MAATSS0018
is ideally suited for use where high accuracy, very
low power consumption and low intermodulation
products are required. Typical applications include
radio, wireless LANs, GPS equipment and other
gain/level control circuits.
The MAATSS0018 is a GaAs MMIC using a mature
1-micron process. The process features full chip
passivation for increased performance and reliability.
Ordering Information
Part Number
MAATSS0018
MAATSS0018TR
Package
Bulk Packaging
1000 piece reel
Note: Reference Application Note M513 for reel size
information.
Absolute Maximum Ratings 1,2
Parameter
Absolute Maximum
Input Power
50 MHz
500 - 2000 MHz
+27 dBm
+34 dBm
Control Voltage
-8.5 V < Vc < +8 V
Operating Temperature
-40°C to +85°C
Storing Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
RoHS
Compliant
MAATSS0018
V2
Functional Block Diagram
Pin Configuration
Pin No.
1
2
3
4
5
Function
RF1
GND
RF2
V1
V2
Description
RF In/Out
RF Ground
RF In/Out
Control Voltage
Control Voltage
Truth Table 3,4,5
V1 V2
01
10
Attenuation State
10 dB
Insertion Loss
3. For positive voltage control, external DC blocking capacitors
are required on all RF ports (pins 1, 2 and 3)
4. Differential voltage, V(state 1) - V(state 0), must be +2.8 V
minimum and less than 8 V.
5. 0 = -8 V to 0.2 V, 1 = -0.2 V to 8 V
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

1 page





PáginasTotal 3 Páginas
PDF Descargar[ Datasheet MAATSS0018.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MAATSS0015Digital AttenuatorTyco Electronics
Tyco Electronics
MAATSS0016Digital AttenuatorTyco Electronics
Tyco Electronics
MAATSS0017Digital AttenuatorTyco Electronics
Tyco Electronics
MAATSS0018Digital AttenuatorTyco Electronics
Tyco Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar