|
|
Número de pieza | MAAP-000077-PED000 | |
Descripción | Amplifier | |
Fabricantes | Tyco Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MAAP-000077-PED000 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Amplifier, Power, 13W
0.7-2.5 GHz
Features
♦ 13 Watt Saturated Output Power Level
♦ Eutectically Mounted to Heat Spreader
♦ Next level integration is a Silver Epoxy-Based Process
♦ Variable Drain Voltage (6-10V) Operation
♦ MSAG™ Process
MAAP-000077-PED000
Rev —
Preliminary Datasheet
Description
The MAAPGM0077-PED000 is a 2-stage 13W power amplifier with on-chip bias net-
works eutectically mounted on a 10-mil thick Copper Molybdenum (CuMo) pedestal.
This product is fully matched to 50 ohms on both the input and output. It can be used
as a power amplifier stage or as a driver stage in high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly reliable GaAs
Multifunction Self-Aligned Gate (MSAG™)Process, each device is 100% RF tested at
the die-on-pedestal assembly level to ensure performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like manufacturing processes,
planar processing of ion implanted transistors, multiple implant capability enabling
power, low-noise, switch and digital FETs on a single chip, and polyimide scratch pro-
tection for ease of use with automated manufacturing processes. The use of refractory
metals and the absence of platinum in the gate metal formulation prevents hydrogen
poisoning when employed in hermetic packaging.
Also Available in:
Primary Applications
♦ Point-to-Point Radio
♦ SatCom
♦ Radio Location
♦ Radar
Description
Part Number
Ceramic Package
MAAP-000077-PKG001
Sample Board (Die)
MAAP-000077-SMB004
Sample Board (Pkg)
MAAP-000077-SMB001
Mechanical Sample (Die)
MAAP-000077-MCH000
Electrical Characteristics: TB = 60°C1, Z0 = 50 Ω, VDD = 10V, IDQ = 3.8A2, Pin = 22 dBm, RG=30 Ω
Parameter
Symbol
Typical
Units
Bandwidth
f
0.7-2.5
GHz
Output Power
1-dB Compression Point
POUT
P1dB
41
41
dBm
dBm
Small Signal Gain G 23
dB
Power Added Efficiency
Input VSWR
PAE
VSWR
26
1.7:1
%
Output VSWR
VSWR
1.6:1
Gate Current
IGG 20
mA
Drain Current
2nd Harmonic (1.5GHz)
2nd Harmonic (2.0GHz)
IDD
2f
2f
4.9
26
47
A
dBc
dBc
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.6 and –1.5V to achieve specified Idq.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1 page Amplifier, Power, 13W
0.7-2.5 GHz
MAAP-000077-PED000
Rev —
Preliminary Datasheet
All Data is at 60ºC MMIC base temperature, CW stimulus, unless otherwise noted.
50
45
1 GHz
40 1.5 GHz
2 GHz
35 2.5 GHz
30
25
20
15
10
5
0
4 6 8 10 12 14 16 18 20 22 24 26 28
Input Power (dBm)
Figure 13. Power Added Efficiency vs. Input Power and Frequency at 8V and
25% IDSS
6 .0
5 .5
5 .0
4 .5
4 .0
3 .5
3 .0
2.5 1 GHz
1.5 GHz
2.0 2 GHz
2.5 GHz
1 .5
1 .0
4 6 8 10 12 14 16 18 20 22 24 26 28
Input Power (dBm)
Figure 14. Drain Current vs. Input Power and Frequency at 8V and 25% IDSS
100
90
4 dBm
80 8 dBm
12 dBm
70
16 dBm
60 20 dBm
24 dBm
50
40
30
20
10
0
0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00
Frequency (GHz)
Figure 15. Second Harmonic vs. Frequency and Input Power at 10V and 25%
IDSS
45 10
41 9
37 8
33 7
29 6
25 5
21 4
17
Pout 10%
3
PAE 10%
13
Pout 25%
2
PAE 25%
9
IDS 10%
1
IDS 25%
50
0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00
Frequency (GHz)
Figure 16. Output Power, Power Added Efficiency, and Drain Current vs.
Frequency and %IDSS at 10V.
Figure 17. Fixture used to characterize MAAPGM0077-DIE
5 under CW stimulus.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet MAAP-000077-PED000.PDF ] |
Número de pieza | Descripción | Fabricantes |
MAAP-000077-PED000 | Amplifier | Tyco Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |