DataSheet.es    


PDF MA4VAT2000-1277T Data sheet ( Hoja de datos )

Número de pieza MA4VAT2000-1277T
Descripción HMIC PIN Diode Variable Attenuator
Fabricantes Tyco Electronics 
Logotipo Tyco Electronics Logotipo



Hay una vista previa y un enlace de descarga de MA4VAT2000-1277T (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! MA4VAT2000-1277T Hoja de datos, Descripción, Manual

www.DataSheet4U.com
HMIC PIN Diode Variable Attenuator
1.70-2.20 GHz
Features
RoHs and ELV compliant
Bandwidth: 1.70 GHz to 2.20 GHz
1.2 dB Insertion Loss, Typical
1.4:1 VSWR, Typical
24 dB Attenuation, Typical
40 dBm IIP3, Typical ( 1MHz Offset, @ +0dBm Pinc )
0-1.5 Volt Control Voltage.
User can add an External Resistor for higher
D.C. Voltage requirements.
Extra Features
Usable Bandwidth: 1.20 GHz to 2.50 GHz
1.5 dB Insertion Loss, Max
2:1 VSWR, Max
23 dB Attenuation, Max
Description and Applications
M/A-COM’s MA4VAT2000-1277T is a HMIC PIN
Diode Variable Attenuator which utilizes an integrated 90
degree 3dB hybrid with a pair of Silicon PIN Diodes
to perform the required attenuation function as
Voltage (Current) is applied. This device operates
from 0 to 1.5 Volts at 260 uA typical control current
for maximum attenuation. The user can add external
biasing resistors to the bias ports for higher voltage
requirements as required.
M/A-COM’s MA4VAT2000-1277T PIN Diode
Variable Attenuator is designed for AGC Circuit
Applications requiring:
Lower Insertion Loss
Lower distortion through attenuation
Larger dynamic range for wide spread
spectrum applications
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
MA4VAT2000-1277T
V2
MLP 3mm Package
(Circuit Side View)
PIN 1
PIN 16
PIN Configuration
PIN Function PIN Function
1
GND
9
DC2
2
GND
10
GND
3
GND
11
GND
4
GND
12
DC1
5
GND
13
GND
6 RF2 14 GND
7
GND
15
RF1
8
GND
16
GND
Center Paddle is RF and D.C. Ground
RF Input/Output Ports are Functionally Symmetrical
Absolute Maximum Ratings1,2
Parameter
Maximum Ratings
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Junction Temperature
+175 °C
RF C.W. Incident Power
+33 dBm C.W.
Reversed Current @ -30 V
l -50nA l
Control Current
50mA per Diode
1. All the above are at Room Temperature except as noted
2. Exceeding the above Limits may cause permanent damage
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet MA4VAT2000-1277T.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MA4VAT2000-1277THMIC PIN Diode Variable AttenuatorTyco Electronics
Tyco Electronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar