DataSheet.es    


PDF RA07M4047M Data sheet ( Hoja de datos )

Número de pieza RA07M4047M
Descripción RoHS Compliance
Fabricantes Mitsubishi Electric 
Logotipo Mitsubishi Electric Logotipo



Hay una vista previa y un enlace de descarga de RA07M4047M (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! RA07M4047M Hoja de datos, Descripción, Manual

ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA07M4047M
RoHS Compliance , 400-470MHz 7W 7.2V, 2 Stage Amp. For PORTABLE RADIO
DESCRIPTION
The RA07M4047M is a 7-watt RF MOSFET Amplifier
Module for 7.2-volt portable radios that operate in the 400- to
470-MHz range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate
voltage (VGG=0V), only a small leakage current flows into the
drain and the RF input signal attenuates up to 60 dB. The output
power and drain current increase as the gate voltage increases.
With a gate voltage around 2.5V (minimum), output power and
drain current increases substantially. The nominal output power
becomes available at 3V (typical) and 3.5V (maximum). At
VGG=3.5V, the typical gate current is 1 mA.
This module is designed for non-linear FM modulation, but may
also be used for linear modulation by setting the drain quiescent
current with the gate voltage and controlling the output power
with the input power.
FEATURES
• Enhancement-Mode MOSFET Transistors
(IDD0 @ VDD=7.2V, VGG=0V)
• Pout>7W @ VDD=7.2V, VGG=3.5V, Pin=50mW
ηT>40% @ Pout=6.5W (VGG control), VDD=7.2V, Pin=50mW
• Broadband Frequency Range: 400-470MHz
www.DataSheet4U.coLm ow-Power Control Current IGG=1mA (typ) at VGG=3.5V
• Module Size: 30 x 10 x 5.4 mm
• Linear operation is possible by setting the quiescent drain
current with the gate voltage and controlling the output power
with the input power
BLOCK DIAGRAM
2
3
14
5
1 RF Input (Pin)
2 Gate Voltage (VGG), Power Control
3 Drain Voltage (VDD), Battery
4 RF Output (Pout)
5 RF Ground (Case)
PACKAGE CODE: H46S
RoHS COMPLIANCE
• RA07M4047M-101 is a RoHS compliant products.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the
lead in electronic Ceramic parts.
How ever ,it applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and
fluorescent tubes.
2.Lead in electronic Ceramic parts.
ORDERING INFORMATION:
ORDER NUMBER
RA07M4047M-101
SUPPLY FORM
Antistatic tray,
25 modules/tray
RA07M4047M
MITSUBISHI ELECTRIC
1/8
24 Jan 2006

1 page




RA07M4047M pdf
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF POWER MODULE
RoHS COMPLIANCE RA07M4047M
OUTLINE DRAWING (mm)
(1.7)
(4.4)
30.0 ±0.2
26.6 ±0.2
21.2 ±0.2
5
1 234
2-R1.5 ±0.1
6.1 ±1
13.7 ±1
18.8 ±1
23.9 ±1
Ø0.45 ±0.15
(19.2)
1 RF Input (Pin)
2 Gate Voltage (VGG)
3 Drain Voltage (VDD)
4 RF Output (Pout)
5 RF Ground (Case)
RA07M4047M
MITSUBISHI ELECTRIC
5/8
24 Jan 2006

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet RA07M4047M.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
RA07M4047MRoHS ComplianceMitsubishi Electric
Mitsubishi Electric

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar