|
|
PDF B41580 Data sheet ( Hoja de datos )
| Número de pieza | B41580 | |
| Descripción | (B41560 / B41580) Capacitors | |
| Fabricantes | EPCOS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B41580 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Aluminum electrolytic capacitors
Capacitors with screw terminals
Series/Type:
www.DataSheet4UD.caomte:
B41560, B41580
December 2006
© EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
1 page  
B41560, B41580
Compact 105 °C
Special design
Low-inductance design
Design
Low inductance (13 nH)
Identification in 3rd Remark
block of ordering code
M003
For capacitors with diameter d ≥ 64.3 mm
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
For terminals
For mounting
Thread Toothed
washers
M5 A 5.1 DIN 6797
M6 A 6.4 DIN 6797
M8 J 8.2 DIN 6797
M12 J 12.5 DIN 6797
Screws/nuts
Cylinder-head screw M5 × 8 DIN 84-4.8
Cylinder-head screw M6 × 12 DIN 85-4.8
Hex nut BM 8 DIN 439
Hex nut BM 12 DIN 439
Maximum
torque
2 Nm
2.5 Nm
4 Nm
10 Nm
The following items must be ordered separately. For details, refer to chapter "Capacitors with
screw terminals Accessories".
Item
Ring clips
Clamps for capacitors with d ≥ 64.3 mm
Insulating parts
Type
B44030
B44030
B44020
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 14
5 Page 
B41560, B41580
Compact 105 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 14
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet B41580.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B41580 | (B41560 / B41580) Capacitors | EPCOS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |