DataSheet.es    


PDF CFK2162-P3 Data sheet ( Hoja de datos )

Número de pieza CFK2162-P3
Descripción Power GaAs FET
Fabricantes Mimix Broadband 
Logotipo Mimix Broadband Logotipo



Hay una vista previa y un enlace de descarga de CFK2162-P3 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! CFK2162-P3 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
CFK2162-P3
QNX@š•@RNP@gh¡
KST@‡b“@p•žˆ˜@g„a™@fet
mŒ“ŒŸ@b˜•„‡…„”‡L@i”†N@QPWYU@r•†‘’ˆ @r‡NL@h•›™š•”L@tˆŸ„™@WWPYY
tˆ’Z@RXQNYXXNTVPP@@f„ŸZ@RXQNYXXNTVQU@@žžžN“Œ“ŒŸ…˜•„‡…„”‡N†•“
ÐRPPU@mŒ“ŒŸ@b˜•„‡…„”‡L@i”†N

1 page




CFK2162-P3 pdf
CFK2162-P3
Product Specifications - July 1997
(4 of 4)
Thermal Considerations
The data shown was taken on a 31 mil thick FR-4 board with 1 ounce copper on both sides. The board was mounted to a base-
plate with 3 screws as shown. The screws bring the top side copper temperature to the same value as the baseplate. The thermal
resistance to the indicated reference lead, ΘJL, is 10°C/W. The thermal resistance to the reference screw is 12°C/W.
1. Use 1 or 2 ounce copper if possible.
2. Solder all eight leads of the CFK2162-P3 package to the appropriate electrical connection.
3. Solder the copper pad on the backside of the CFK2162-P3 package to the ground plane.
4. Use a large ground pad area with many plated through-holes as shown.
5. If possible, use at least one screw no more than 0.2 inches from the CFK2162-P3 package to provide a low thermal resistance
path to the baseplate of the package.
Ordering Information
The CFK2162-P3 power stage is available in a SO-8 surface mount package. Devices are available in tape and reel. Ordering part
numbers are listed.
Part Number for Ordering
CFK2162-P3
CFK2162-P3-000T
Function
1.8 - 2.0 GHz Power Stage
1.8 - 2.0 GHz Power Stage
Package
SO-8 surface mount power package
SO-8 surface mount power package in tape and reel
Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating
parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent
rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or
other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent
regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.
3236 Scott Boulevard, Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet CFK2162-P3.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CFK2162-P1Power GaAs FETMimix Broadband
Mimix Broadband
CFK2162-P3Power GaAs FETMimix Broadband
Mimix Broadband
CFK2162-P3Power GaAs FETCeleritek
Celeritek
CFK2162-P5Power GaAs FETMimix Broadband
Mimix Broadband

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar